mbox series

[0/8] Add devicetree support for SDX75 Modem and IDP

Message ID 1684487350-30476-1-git-send-email-quic_rohiagar@quicinc.com (mailing list archive)
Headers show
Series Add devicetree support for SDX75 Modem and IDP | expand

Message

Rohit Agarwal May 19, 2023, 9:09 a.m. UTC 
Hi,

This series adds devicetree support for Qualcomm SDX75 platform and IDP
board. This series functionally depends on GCC and RPMh Clock support
series [1], and pinctrl support for SDX75 [2] which are under review.

With this current devicetree support, the IDP can boot into initramfsshell.

[1] https://lore.kernel.org/lkml/20230419133013.2563-3-quic_tdas@quicinc.com/
[2] https://lore.kernel.org/all/1684409015-25196-1-git-send-email-quic_rohiagar@quicinc.com/

Thanks,
Rohit.


Imran Shaik (1):
  arm64: dts: qcom: Add support for GCC and RPMHCC for SDX75

Rohit Agarwal (7):
  dt-bindings: arm: qcom: Document SDX75 platform and boards
  dt-bindings: firmware: scm: Add compatible for SDX75
  dt-bindings: interrupt-controller: Add SDX75 PDC compatible
  dt-bindings: arm-smmu: Add SDX75 SMMU compatible
  arm64: dts: qcom: Add SDX75 platform and IDP board support
  arm64: dts: qcom: Add QUPv3 UART console node for SDX75
  arm64: dts: qcom: Enable the QUPv3 UART console for SDX75

 Documentation/devicetree/bindings/arm/qcom.yaml    |   7 +
 .../devicetree/bindings/firmware/qcom,scm.yaml     |   1 +
 .../bindings/interrupt-controller/qcom,pdc.yaml    |   1 +
 .../devicetree/bindings/iommu/arm,smmu.yaml        |   1 +
 arch/arm64/boot/dts/qcom/Makefile                  |   1 +
 arch/arm64/boot/dts/qcom/sdx75-idp.dts             |  34 ++
 arch/arm64/boot/dts/qcom/sdx75.dtsi                | 618 +++++++++++++++++++++
 7 files changed, 663 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sdx75-idp.dts
 create mode 100644 arch/arm64/boot/dts/qcom/sdx75.dtsi

Comments

Will Deacon June 5, 2023, 4:35 p.m. UTC | #1 
On Fri, 19 May 2023 14:39:02 +0530, Rohit Agarwal wrote:
> This series adds devicetree support for Qualcomm SDX75 platform and IDP
> board. This series functionally depends on GCC and RPMh Clock support
> series [1], and pinctrl support for SDX75 [2] which are under review.
> 
> With this current devicetree support, the IDP can boot into initramfsshell.
> 
> [1] https://lore.kernel.org/lkml/20230419133013.2563-3-quic_tdas@quicinc.com/
> [2] https://lore.kernel.org/all/1684409015-25196-1-git-send-email-quic_rohiagar@quicinc.com/
> 
> [...]

Applied bindings patch to will (for-joerg/arm-smmu/bindings), thanks!

[4/8] dt-bindings: arm-smmu: Add SDX75 SMMU compatible
      https://git.kernel.org/will/c/48989c0b25ca

Cheers,