mbox series

[v2,0/4] Add dbi2 and atu for i.MX8M PCIe EP

Message ID 1721790236-3966-1-git-send-email-hongxing.zhu@nxp.com (mailing list archive)
Headers show
Series Add dbi2 and atu for i.MX8M PCIe EP | expand

Message

Hongxing Zhu July 24, 2024, 3:03 a.m. UTC
v2 changes:
Thanks for Conor's comments.
- Place the new added properties at the end.

Ideally, dbi2 and atu base addresses should be fetched from DT.
Add dbi2 and atu base addresses for i.MX8M PCIe EP here.

[PATCH v2 1/4] dt-bindings: imx6q-pcie: Add reg-name "dbi2" and "atu"
[PATCH v2 2/4] dts: arm64: imx8mq: Add dbi2 and atu reg for i.MX8MQ
[PATCH v2 3/4] dts: arm64: imx8mp: Add dbi2 and atu reg for i.MX8MP
[PATCH v2 4/4] dts: arm64: imx8mm: Add dbi2 and atu reg for i.MX8MM

Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml | 13 +++++++++----
arch/arm64/boot/dts/freescale/imx8mm.dtsi                    |  8 +++++---
arch/arm64/boot/dts/freescale/imx8mp.dtsi                    |  7 +++++--
arch/arm64/boot/dts/freescale/imx8mq.dtsi                    |  8 +++++---
4 files changed, 24 insertions(+), 12 deletions(-)