mbox series

[mmc-next,v3,0/3] solve SDHCI DWC MSHC 128MB DMA boundary limitation

Message ID 20180730104228.28b58bd0@xhacker.debian (mailing list archive)
Headers show
Series solve SDHCI DWC MSHC 128MB DMA boundary limitation | expand

Message

Jisheng Zhang July 30, 2018, 2:42 a.m. UTC
When using DMA, if the DMA addr spans 128MB boundary, we have to split
the DMA transfer into two so that each one doesn't exceed the boundary.

patch1 adds adma_table_num to struct sdhci_host so that driver can
control the ADMA table number.
patch2 introduces adma_write_desc() hook to struct sdhci_ops so that
driver can override it.
patch3 finally solves the 128MB boundary limitation.

since v2:
  - make use of "likely" to check (!len || BOUNDARY_OK(addr, len))
  - explictly include <linux/sizes.h> for SZ_128M

since v1:
  - fix BOUNDARY_OK macro if addr+len is aligned to 128MB
  - use DIV_ROUND_UP to cal extra desc num
  - fix !len for dwcmshc_adma_write_desc()

Jisheng Zhang (3):
  mmc: sdhci: add adma_table_num member to struct sdhci_host
  mmc: sdhci: introduce adma_write_desc() hook to struct sdhci_ops
  mmc: sdhci-of-dwcmshc: solve 128MB DMA boundary limitation

 drivers/mmc/host/sdhci-of-dwcmshc.c | 43 ++++++++++++++++++++++++++
 drivers/mmc/host/sdhci.c            | 48 +++++++++++++++++++----------
 drivers/mmc/host/sdhci.h            |  8 +++++
 3 files changed, 83 insertions(+), 16 deletions(-)

Comments

Jisheng Zhang Aug. 9, 2018, 2:27 a.m. UTC | #1
Hi Adrian, Ulf,

could you please review these patches? Any comments are welcome.

Thanks in advance,
Jisheng

On Mon, 30 Jul 2018 10:42:28 +0800 Jisheng Zhang wrote:

> When using DMA, if the DMA addr spans 128MB boundary, we have to split
> the DMA transfer into two so that each one doesn't exceed the boundary.
> 
> patch1 adds adma_table_num to struct sdhci_host so that driver can
> control the ADMA table number.
> patch2 introduces adma_write_desc() hook to struct sdhci_ops so that
> driver can override it.
> patch3 finally solves the 128MB boundary limitation.
> 
> since v2:
>   - make use of "likely" to check (!len || BOUNDARY_OK(addr, len))
>   - explictly include <linux/sizes.h> for SZ_128M
> 
> since v1:
>   - fix BOUNDARY_OK macro if addr+len is aligned to 128MB
>   - use DIV_ROUND_UP to cal extra desc num
>   - fix !len for dwcmshc_adma_write_desc()
> 
> Jisheng Zhang (3):
>   mmc: sdhci: add adma_table_num member to struct sdhci_host
>   mmc: sdhci: introduce adma_write_desc() hook to struct sdhci_ops
>   mmc: sdhci-of-dwcmshc: solve 128MB DMA boundary limitation
> 
>  drivers/mmc/host/sdhci-of-dwcmshc.c | 43 ++++++++++++++++++++++++++
>  drivers/mmc/host/sdhci.c            | 48 +++++++++++++++++++----------
>  drivers/mmc/host/sdhci.h            |  8 +++++
>  3 files changed, 83 insertions(+), 16 deletions(-)
>