mbox series

[0/5] net: mvneta: some bug fix and trivial improvement

Message ID 20180829162456.2bd69796@xhacker.debian (mailing list archive)
Headers show
Series net: mvneta: some bug fix and trivial improvement | expand

Message

Jisheng Zhang Aug. 29, 2018, 8:25 a.m. UTC
patch1 fixes rx_offset_correction set and usage. Because the
rx_offset_correction is RX packet offset correction for platforms,
it's not related with SW BM, instead, it's only related with the
platform's NET_SKB_PAD.

patch2 fixes the wrong function to unmap rx buf

patch3 removes the NETIF_F_GRO check ourself, because the net subsystem
will handle it for us.

patch4 enables NETIF_F_RXCSUM by default, since the driver and HW
supports the feature.

patch5 is a trivial optimization, to reduce smp_processor_id() calling
in mvneta_tx_done_gbe.

Jisheng Zhang (5):
  net: mvneta: fix rx_offset_correction set and usage
  net: mvneta: fix the wrong function to unmap rx buf
  net: mvneta: Don't check NETIF_F_GRO ourself
  net: mvneta: enable NETIF_F_RXCSUM by default
  net: mvneta: reduce smp_processor_id() calling in mvneta_tx_done_gbe

 drivers/net/ethernet/marvell/mvneta.c | 49 ++++++++++++---------------
 1 file changed, 22 insertions(+), 27 deletions(-)

Comments

Jisheng Zhang Aug. 29, 2018, 8:40 a.m. UTC | #1
On Wed, 29 Aug 2018 16:25:57 +0800
Jisheng Zhang <Jisheng.Zhang@synaptics.com> wrote:

> patch1 fixes rx_offset_correction set and usage. Because the
> rx_offset_correction is RX packet offset correction for platforms,
> it's not related with SW BM, instead, it's only related with the
> platform's NET_SKB_PAD.
> 
> patch2 fixes the wrong function to unmap rx buf

I have question about the following two commits:

7e47fd84b56b ("net: mvneta: Allocate page for the descriptor"), it cause
a waste, for normal 1500 MTU, before this patch we allocate 1920Bytes for rx
after this patch, we always allocate PAGE_SIZE bytes, if PAGE_SIZE=4096, we
waste 53% memory for each rx buf. I'm not sure whether the performance
improvement deserve the pay.

562e2f467e71 ("net: mvneta: Improve the buffer allocation method for SWBM")
mentions that "With system having a small memory (around 256MB), the state
"cannot allocate memory to refill with new buffer" is reach pretty quickly"
is it due to the memory waste as said above? Anyway, by this commit, we
want to improve the situation on a small memory system, so should we firstly
revert commit 7e47fd84b56b ("net: mvneta: Allocate page for the descriptor")?

Any comments are welcome!

Thanks


> 
> patch3 removes the NETIF_F_GRO check ourself, because the net subsystem
> will handle it for us.
> 
> patch4 enables NETIF_F_RXCSUM by default, since the driver and HW
> supports the feature.
> 
> patch5 is a trivial optimization, to reduce smp_processor_id() calling
> in mvneta_tx_done_gbe.
> 
> Jisheng Zhang (5):
>   net: mvneta: fix rx_offset_correction set and usage
>   net: mvneta: fix the wrong function to unmap rx buf
>   net: mvneta: Don't check NETIF_F_GRO ourself
>   net: mvneta: enable NETIF_F_RXCSUM by default
>   net: mvneta: reduce smp_processor_id() calling in mvneta_tx_done_gbe
> 
>  drivers/net/ethernet/marvell/mvneta.c | 49 ++++++++++++---------------
>  1 file changed, 22 insertions(+), 27 deletions(-)
>
Jisheng Zhang Aug. 29, 2018, 8:51 a.m. UTC | #2
On Wed, 29 Aug 2018 16:40:24 +0800 Jisheng Zhang wrote:

> On Wed, 29 Aug 2018 16:25:57 +0800
> Jisheng Zhang wrote:
> 
> > patch1 fixes rx_offset_correction set and usage. Because the
> > rx_offset_correction is RX packet offset correction for platforms,
> > it's not related with SW BM, instead, it's only related with the
> > platform's NET_SKB_PAD.
> > 
> > patch2 fixes the wrong function to unmap rx buf  
> 
> I have question about the following two commits:
> 
> 7e47fd84b56b ("net: mvneta: Allocate page for the descriptor"), it cause
> a waste, for normal 1500 MTU, before this patch we allocate 1920Bytes for rx
> after this patch, we always allocate PAGE_SIZE bytes, if PAGE_SIZE=4096, we
> waste 53% memory for each rx buf. I'm not sure whether the performance
> improvement deserve the pay.
> 
> 562e2f467e71 ("net: mvneta: Improve the buffer allocation method for SWBM")
> mentions that "With system having a small memory (around 256MB), the state
> "cannot allocate memory to refill with new buffer" is reach pretty quickly"
> is it due to the memory waste as said above? Anyway, by this commit, we
> want to improve the situation on a small memory system, so should we firstly
> revert commit 7e47fd84b56b ("net: mvneta: Allocate page for the descriptor")?
> 

If maintainers decide to revert the two commits: 7e47fd84b56b and 562e2f467e71
then, patch1,2,3 are useless, we can drop them. Only patch4 and patch5 are
still useful.

Thanks

> Any comments are welcome!
> 
> Thanks
> 
> 
> > 
> > patch3 removes the NETIF_F_GRO check ourself, because the net subsystem
> > will handle it for us.
> > 
> > patch4 enables NETIF_F_RXCSUM by default, since the driver and HW
> > supports the feature.
> > 
> > patch5 is a trivial optimization, to reduce smp_processor_id() calling
> > in mvneta_tx_done_gbe.
> > 
> > Jisheng Zhang (5):
> >   net: mvneta: fix rx_offset_correction set and usage
> >   net: mvneta: fix the wrong function to unmap rx buf
> >   net: mvneta: Don't check NETIF_F_GRO ourself
> >   net: mvneta: enable NETIF_F_RXCSUM by default
> >   net: mvneta: reduce smp_processor_id() calling in mvneta_tx_done_gbe
> > 
> >  drivers/net/ethernet/marvell/mvneta.c | 49 ++++++++++++---------------
> >  1 file changed, 22 insertions(+), 27 deletions(-)
> >   
>
Andrew Lunn Aug. 29, 2018, 1:12 p.m. UTC | #3
Hi Jisheng

Please separate fixes from new features.

Fixes should be based on DaveM net branch, and use the subject line
[PATCH net]...

New features should be based on DaveM net-next branch, and use the
subject line [PATCH net-next]...

	Thanks
		Andrew
Jisheng Zhang Aug. 30, 2018, 3:42 a.m. UTC | #4
On Wed, 29 Aug 2018 15:12:32 +0200 Andrew Lunn wrote:

> Hi Jisheng
> 
> Please separate fixes from new features.
> 
> Fixes should be based on DaveM net branch, and use the subject line
> [PATCH net]...
> 
> New features should be based on DaveM net-next branch, and use the
> subject line [PATCH net-next]...

Got it. Thanks for information.
Jisheng Zhang Aug. 30, 2018, 3:53 a.m. UTC | #5
On Wed, 29 Aug 2018 16:51:31 +0800 Jisheng Zhang wrote:

> On Wed, 29 Aug 2018 16:40:24 +0800 Jisheng Zhang wrote:
> 
> > On Wed, 29 Aug 2018 16:25:57 +0800
> > Jisheng Zhang wrote:
> >   
> > > patch1 fixes rx_offset_correction set and usage. Because the
> > > rx_offset_correction is RX packet offset correction for platforms,
> > > it's not related with SW BM, instead, it's only related with the
> > > platform's NET_SKB_PAD.
> > > 
> > > patch2 fixes the wrong function to unmap rx buf    
> > 
> > I have question about the following two commits:
> > 
> > 7e47fd84b56b ("net: mvneta: Allocate page for the descriptor"), it cause
> > a waste, for normal 1500 MTU, before this patch we allocate 1920Bytes for rx
> > after this patch, we always allocate PAGE_SIZE bytes, if PAGE_SIZE=4096, we
> > waste 53% memory for each rx buf. I'm not sure whether the performance
> > improvement deserve the pay.
> > 
> > 562e2f467e71 ("net: mvneta: Improve the buffer allocation method for SWBM")
> > mentions that "With system having a small memory (around 256MB), the state
> > "cannot allocate memory to refill with new buffer" is reach pretty quickly"
> > is it due to the memory waste as said above? Anyway, by this commit, we
> > want to improve the situation on a small memory system, so should we firstly
> > revert commit 7e47fd84b56b ("net: mvneta: Allocate page for the descriptor")?

Any comments? 

Now I believe the situation is due to the memory waste introduced by 7e47fd84b56b
With linux 4.18, I tried to limit berlin platforms available memory to 256MB,
I didn't see "cannot allocate memory to refill with new buffer".

Thanks

> >   
> 
> If maintainers decide to revert the two commits: 7e47fd84b56b and 562e2f467e71
> then, patch1,2,3 are useless, we can drop them. Only patch4 and patch5 are
> still useful.
> 
> Thanks
> 
> > Any comments are welcome!
> > 
> > Thanks
> > 
> >   
> > > 
> > > patch3 removes the NETIF_F_GRO check ourself, because the net subsystem
> > > will handle it for us.
> > > 
> > > patch4 enables NETIF_F_RXCSUM by default, since the driver and HW
> > > supports the feature.
> > > 
> > > patch5 is a trivial optimization, to reduce smp_processor_id() calling
> > > in mvneta_tx_done_gbe.
> > > 
> > > Jisheng Zhang (5):
> > >   net: mvneta: fix rx_offset_correction set and usage
> > >   net: mvneta: fix the wrong function to unmap rx buf
> > >   net: mvneta: Don't check NETIF_F_GRO ourself
> > >   net: mvneta: enable NETIF_F_RXCSUM by default
> > >   net: mvneta: reduce smp_processor_id() calling in mvneta_tx_done_gbe
> > > 
> > >  drivers/net/ethernet/marvell/mvneta.c | 49 ++++++++++++---------------
> > >  1 file changed, 22 insertions(+), 27 deletions(-)
> > >     
> >   
>