mbox series

[v3,0/4] Add support of STM32 hwspinlock

Message ID 20181112152342.6561-1-benjamin.gaignard@st.com (mailing list archive)
Headers show
Series Add support of STM32 hwspinlock | expand

Message

Benjamin Gaignard Nov. 12, 2018, 3:23 p.m. UTC
This serie adds the support of the hardware semaphore block for stm32mp1 SoC.

version 3:
- fix clock name in properties description.
- use postcore_initcall() instead of module_platform_driver()

version 2:
- fix comments done by Bjorn about clock naming, license terms in header,
  alphabetic ordering in Makefile and Kconfig and remove function
- Do not push test module in this version while waiting for feedbacks about it


Benjamin Gaignard (4):
  dt-bindings: hwlock: Document STM32 hwspinlock bindings
  hwspinlock: add STM32 hwspinlock device
  ARM: dts: stm32: Add hwspinlock node for stm32mp157 SoC
  ARM: dts: stm32: enable hwspinlock on stm32mp157c-ed1

 .../bindings/hwlock/st,stm32-hwspinlock.txt        |  23 +++
 arch/arm/boot/dts/stm32mp157c-ed1.dts              |   4 +
 arch/arm/boot/dts/stm32mp157c.dtsi                 |   9 ++
 drivers/hwspinlock/Kconfig                         |   9 ++
 drivers/hwspinlock/Makefile                        |   1 +
 drivers/hwspinlock/stm32_hwspinlock.c              | 156 +++++++++++++++++++++
 6 files changed, 202 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/hwlock/st,stm32-hwspinlock.txt
 create mode 100644 drivers/hwspinlock/stm32_hwspinlock.c

Comments

Alexandre TORGUE Nov. 13, 2018, 8:09 a.m. UTC | #1
Hi Benjamin

On 11/12/18 4:23 PM, Benjamin Gaignard wrote:
> This serie adds the support of the hardware semaphore block for stm32mp1 SoC.
> 
> version 3:
> - fix clock name in properties description.
> - use postcore_initcall() instead of module_platform_driver()
> 
> version 2:
> - fix comments done by Bjorn about clock naming, license terms in header,
>    alphabetic ordering in Makefile and Kconfig and remove function
> - Do not push test module in this version while waiting for feedbacks about it
> 
> 
> Benjamin Gaignard (4):
>    dt-bindings: hwlock: Document STM32 hwspinlock bindings
>    hwspinlock: add STM32 hwspinlock device
>    ARM: dts: stm32: Add hwspinlock node for stm32mp157 SoC
>    ARM: dts: stm32: enable hwspinlock on stm32mp157c-ed1

DT patches applied on stm32-next.

Regards
Alex

> 
>   .../bindings/hwlock/st,stm32-hwspinlock.txt        |  23 +++
>   arch/arm/boot/dts/stm32mp157c-ed1.dts              |   4 +
>   arch/arm/boot/dts/stm32mp157c.dtsi                 |   9 ++
>   drivers/hwspinlock/Kconfig                         |   9 ++
>   drivers/hwspinlock/Makefile                        |   1 +
>   drivers/hwspinlock/stm32_hwspinlock.c              | 156 +++++++++++++++++++++
>   6 files changed, 202 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/hwlock/st,stm32-hwspinlock.txt
>   create mode 100644 drivers/hwspinlock/stm32_hwspinlock.c
>
Alexandre TORGUE Dec. 3, 2018, 8:46 a.m. UTC | #2
Hi Benjamin,

On 11/12/18 4:23 PM, Benjamin Gaignard wrote:
> This serie adds the support of the hardware semaphore block for stm32mp1 SoC.
> 
> version 3:
> - fix clock name in properties description.
> - use postcore_initcall() instead of module_platform_driver()
> 
> version 2:
> - fix comments done by Bjorn about clock naming, license terms in header,
>    alphabetic ordering in Makefile and Kconfig and remove function
> - Do not push test module in this version while waiting for feedbacks about it
> 
> 
> Benjamin Gaignard (4):
>    dt-bindings: hwlock: Document STM32 hwspinlock bindings
>    hwspinlock: add STM32 hwspinlock device
>    ARM: dts: stm32: Add hwspinlock node for stm32mp157 SoC
>    ARM: dts: stm32: enable hwspinlock on stm32mp157c-ed1
> 
>   .../bindings/hwlock/st,stm32-hwspinlock.txt        |  23 +++
>   arch/arm/boot/dts/stm32mp157c-ed1.dts              |   4 +
>   arch/arm/boot/dts/stm32mp157c.dtsi                 |   9 ++
>   drivers/hwspinlock/Kconfig                         |   9 ++
>   drivers/hwspinlock/Makefile                        |   1 +
>   drivers/hwspinlock/stm32_hwspinlock.c              | 156 +++++++++++++++++++++
>   6 files changed, 202 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/hwlock/st,stm32-hwspinlock.txt
>   create mode 100644 drivers/hwspinlock/stm32_hwspinlock.c
> 

There is a (strong) dependency between pinctrl and hsem.
As our pin controller is enabled by default, it's better to enable also
your hwspinlock device by default. It will avoid pin controller probe 
defer and a no stable behavior. So, I gonna remove DT patches from 
stm32-next. Those Dt patches will not be included in my 4.20 pull-request.

regards
Alex