mbox series

[v4,0/3] Reset controller support for i.MX8MQ

Message ID 20181220010700.8598-1-andrew.smirnov@gmail.com (mailing list archive)
Headers show
Series Reset controller support for i.MX8MQ | expand

Message

Andrey Smirnov Dec. 20, 2018, 1:06 a.m. UTC 
Everyone:

This patch contains changes I made in order to add support for i.MX8MQ
to reset-imx7.c in order to enable support of PCIE IP block on i.MX8MQ
SoCs.

Feedback is welcome!

Thanks,
Andrey Smirnov

Changes since [v3]

 - Kconfig entry is converted to use ARCH_MXC

 - Collected Reviewed-by from Rob Herring

Changes since [v2]

 - Constified "variant" field in struct imx7_src

 - Moved dt-bindings/reset/imx8mq-reset.h to be a part of the patch
   documenting DT bindings

Changes since [v1]

 - Series re-written to use a per-variant LUT instead of using a
   single table

- Changed driver to use "imx8mq" insead of "imx8m" to match other
  drivers and CONFIG_ARCH_IMX8MQ

- Updated list of exported i.MX8MQ resets, add missing and remove
  bogus ones (hopefully nothing is missing this time)

[v3] lkml.kernel.org/r/20181217023827.7947-1-andrew.smirnov@gmail.com
[v2] lkml.kernel.org/r/20181128043738.12714-1-andrew.smirnov@gmail.com
[v1] lkml.kernel.org/r/20181117181131.9330-2-andrew.smirnov@gmail.com

Andrey Smirnov (3):
  reset: imx7: Add plubming to support multiple IP variants
  dt-bindings: reset: imx7: Document usage on i.MX8MQ SoCs
  reset: imx7: Add support for i.MX8MQ IP block variant

 .../bindings/reset/fsl,imx7-src.txt           |   7 +-
 drivers/reset/Kconfig                         |   4 +-
 drivers/reset/reset-imx7.c                    | 166 ++++++++++++++++--
 include/dt-bindings/reset/imx8mq-reset.h      |  64 +++++++
 4 files changed, 221 insertions(+), 20 deletions(-)
 create mode 100644 include/dt-bindings/reset/imx8mq-reset.h

Comments

Andrey Smirnov Jan. 15, 2019, 4:41 a.m. UTC | #1 
On Wed, Dec 19, 2018 at 5:07 PM Andrey Smirnov <andrew.smirnov@gmail.com> wrote:
>
> Everyone:
>
> This patch contains changes I made in order to add support for i.MX8MQ
> to reset-imx7.c in order to enable support of PCIE IP block on i.MX8MQ
> SoCs.
>
> Feedback is welcome!
>
> Thanks,
> Andrey Smirnov
>

Philipp, are there any changes that needs to be made to this series,
or is it good enough to be accepted?

Thanks,
Andrey Smirnov