mbox series

[v2,0/2] add i2c controlled qixis driver

Message ID 20190130165916.8628-1-pankaj.bansal@nxp.com (mailing list archive)
Headers show
Series add i2c controlled qixis driver | expand

Message

Pankaj Bansal Jan. 30, 2019, 11:34 a.m. UTC 
FPGA on LX2160AQDS/LX2160ARDB connected on I2C bus, so add qixis
driver which is basically an i2c client driver to control FPGA.

This driver is essential to control MDIO mux multiplexing.

This driver is dependent on below patches:
https://www.mail-archive.com/netdev@vger.kernel.org/msg281274.html

V1 of this series:
https://patchwork.kernel.org/cover/10627297/

Cc: Varun Sethi <V.Sethi@nxp.com>

Pankaj Bansal (2):
  dt-bindings: soc: fsl: Document Qixis FPGA usage
  fsl: add i2c controlled qixis driver

 .../bindings/soc/fsl/qixis_ctrl.txt           |  33 +++++
 drivers/soc/fsl/Kconfig                       |   8 ++
 drivers/soc/fsl/Makefile                      |   1 +
 drivers/soc/fsl/qixis_ctrl.c                  | 121 ++++++++++++++++++
 4 files changed, 163 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/fsl/qixis_ctrl.txt
 create mode 100644 drivers/soc/fsl/qixis_ctrl.c