mbox series

[v3,0/5] PCIE support for i.MX8MQ (DT changes)

Message ID 20190220015857.7136-1-andrew.smirnov@gmail.com (mailing list archive)
Headers show
Series PCIE support for i.MX8MQ (DT changes) | expand

Message

Andrey Smirnov Feb. 20, 2019, 1:58 a.m. UTC 
Everyone:

This series contains all of the i.MX Device Tree changes I made to
enable support of PCIe on i.MX8MQ EVK.

NOTE: Immutable brach containing imx8mq-reset.h used in "arm64: dts:
Add nodes for PCIe IP blocks" is availible in [reset-imx8mq]

Feedback is welcome!

Changes since [v2]:

    - Fixed various nits pointed out by Lucas

    - Collected Acked-by and Reviewed-by from Lucas

    - Moved EVK's WiFi reset pin configuration into a separate pinmux
      entry.

Changes since [v1]:

    - Dropped unsupported IRQ from PCIe nodes (a leftover from vendor tree)

    - Added "pcie_aux" clock and moved clock configuration to board
      file since "pcie_bus" clock is now board specific

Thanks,
Andrey Smirnov

[reset-imx8mq] git://git.pengutronix.de/pza/linux reset/imx8mq
[v1] https://lore.kernel.org/lkml/20190131204333.31846-1-andrew.smirnov@gmail.com/
[v2] https://lore.kernel.org/lkml/20190208002941.30343-1-andrew.smirnov@gmail.com

Andrey Smirnov (5):
  arm64: dts: imx8mq: Mark iomuxc_gpr as i.MX6Q compatible
  arm64: dts: imx8mq: Add a node for SRC IP block
  arm64: dts: imx8mq: Combine PCIE power domains
  arm64: dts: imx8mq: Add nodes for PCIe IP blocks
  arm64: dts: imx8mq-evk: Enable PCIE0 interface

 arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 42 ++++++++++
 arch/arm64/boot/dts/freescale/imx8mq.dtsi    | 84 +++++++++++++++++++-
 2 files changed, 124 insertions(+), 2 deletions(-)