[v2,0/5] Add i.MX8MM support

Message

Bryan O'Donoghue April 19, 2019, 4:48 p.m. UTC

V2:
- Rebased to linux-next/master to align with i.8MQ work
- Two patches dropped as a result of rebase
- Added patch to expand OCOTP_CTRL_ADDR to 8 bits for all users - Leonard
- Makes sure nregs = 60 not 64 for i.MX8MM
- Tested imx8mm-evk, imx7s-warp7

V1:
This set adds support for the i.MX8MM.

When adding support for this processor there are two interesting gotchas to
watch for.

#1 We current do not preserve the WAIT field for i.MX6 and since we are
   reusing the i.MX6 set_timing() values, this would also affect i.MX8.
   On the face of it, it appears to be an inocuous error with no real side
   effects.

#2 Secondly the i.MX8MM will calculate a zero value for the RELAX bit-field
   when programming up OTP fuses.
   This is fine for programming the fuses but, it introduces a strange
   failure state with reloading the shadow registers subsequent to blowing
   an OTP fuse.
   The second important patch here then is ensuring the RELAX field is
   non-zero to avoid the failure state.

Bryan O'Donoghue (5):
  nvmem: imx-ocotp: Elongate OCOTP_CTRL ADDR field to eight bits
  nvmem: imx-ocotp: Ensure WAIT bits are preserved when setting timing
  nvmem: imx-ocotp: Ensure the RELAX field is non-zero
  nvmem: imx-ocotp: Add i.MX8MM support
  dt-bindings: imx-ocotp: Add i.MX8MM compatible

 .../devicetree/bindings/nvmem/imx-ocotp.txt        |  1 +
 drivers/nvmem/imx-ocotp.c                          | 14 ++++++++++++--
 2 files changed, 13 insertions(+), 2 deletions(-)