mbox series

[v4,0/4] Add drivers for auo, kd101n80-45na and boe, tv101wum-nl6 panels

Message ID 20190811091001.49555-1-jitao.shi@mediatek.com (mailing list archive)
Headers show
Series Add drivers for auo, kd101n80-45na and boe, tv101wum-nl6 panels | expand

Message

Jitao Shi Aug. 11, 2019, 9:09 a.m. UTC
Changes since v3:
 - remove check enable_gpio.
 - fine tune the auo,kd101n80-45na panel's power on timing.

Changes since v2:
 - correct the panel size
 - remove blank line in Kconfig
 - move auo,kd101n80-45na panel driver in this series.

Changes since v1:

 - update typo nl6 -> n16.
 - update new panel config and makefile are added in alphabetically order.
 - add the panel mode and panel info in driver data.
 - merge auo,kd101n80-45a and boe,tv101wum-nl6 in one driver

Jitao Shi (4):
  dt-bindings: display: panel: Add BOE tv101wum-n16 panel bindings
  drm/panel: support for BOE tv101wum-nl6 wuxga dsi video mode panel
  dt-bindings: display: panel: add auo kd101n80-45na panel bindings
  drm/panel: support for auo,kd101n80-45na wuxga dsi video mode panel

 .../display/panel/auo,kd101n80-45na.txt       |  34 +
 .../display/panel/boe,tv101wum-nl6.txt        |  34 +
 drivers/gpu/drm/panel/Kconfig                 |   9 +
 drivers/gpu/drm/panel/Makefile                |   1 +
 .../gpu/drm/panel/panel-boe-tv101wum-nl6.c    | 761 ++++++++++++++++++
 5 files changed, 839 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/auo,kd101n80-45na.txt
 create mode 100644 Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.txt
 create mode 100644 drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c

Comments

Sam Ravnborg Aug. 11, 2019, 9:11 p.m. UTC | #1
Hi Jitao.

>  .../display/panel/auo,kd101n80-45na.txt       |  34 +
>  .../display/panel/boe,tv101wum-nl6.txt        |  34 +

panel bindings are in the process of being migrated to the new
meta-schema format.
Therefore new bindings should preferably also follow the new format.

Can you please look into this.
In upstream and drm-misc-next there is already some examples.

Note: It is not a hard rule that new bindings shall be in
the new meta-schema format (.yaml extension), but as this is
best practice now it is preferred.
Same goes for display bindings btw.

	Sam