mbox series

[v2,0/4] clk: renesas: Add r8a77961 support

Message ID 20191023122941.12342-1-geert+renesas@glider.be (mailing list archive)
Headers show
Series clk: renesas: Add r8a77961 support | expand

Message

Geert Uytterhoeven Oct. 23, 2019, 12:29 p.m. UTC
Hi all,

This patch series adds support for the Clock Pulse Generator / Module
Standby and Software Reset block in the Renesas R-Car M3-W+ (R8A77961)
SoC.  As R-Car M3-W+ is very similar to R-Car M3-W (R8A77960), the
existing driver for R-Car M3-W is updated to handle both.

To avoid confusion between R-Car M3-W and M3-W+, the existing config
symbol for M3-W is renamed to CLK_R8A77960 in a dependency-free way, and
references to r8a7796 are updated.

Changes compared to v1[1]:
  - Split in per-subsystem series,
  - Add Reviewed-by, Tested-by,
  - Rename CLK_R8A7796,
  - Update r8a7796 references,

I intend to queue this series in clk-renesas-for-v5.5.
The second patch will be put on a branch shared between driver and DTS.

Thanks for your comments!

[1] "[PATCH/RFC 00/19] arm64: dts: renesas: Initial support for R-Car M3-W+"
    https://lore.kernel.org/linux-renesas-soc/20191007102332.12196-1-geert+renesas@glider.be/

Geert Uytterhoeven (4):
  dt-bindings: clock: renesas: cpg-mssr: Document r8a77961 support
  dt-bindings: clock: Add r8a77961 CPG Core Clock Definitions
  clk: renesas: Rename CLK_R8A7796 to CLK_R8A77960
  clk: renesas: r8a7796: Add R8A77961 CPG/MSSR support

 .../bindings/clock/renesas,cpg-mssr.txt       | 11 ++--
 drivers/clk/renesas/Kconfig                   |  9 ++-
 drivers/clk/renesas/Makefile                  |  3 +-
 drivers/clk/renesas/r8a7796-cpg-mssr.c        | 24 +++++--
 drivers/clk/renesas/renesas-cpg-mssr.c        |  8 ++-
 include/dt-bindings/clock/r8a77961-cpg-mssr.h | 65 +++++++++++++++++++
 6 files changed, 107 insertions(+), 13 deletions(-)
 create mode 100644 include/dt-bindings/clock/r8a77961-cpg-mssr.h