mbox series

[v2,0/3] pinctrl: sh-pfc: Add r8a77961 support

Message ID 20191023122955.12420-1-geert+renesas@glider.be (mailing list archive)
Headers show
Series pinctrl: sh-pfc: Add r8a77961 support | expand

Message

Geert Uytterhoeven Oct. 23, 2019, 12:29 p.m. UTC
Hi all,

This patch series adds support for the Pin Function Controller in the
Renesas R-Car M3-W+ (R8A77961) SoC.  As R-Car M3-W+ is very similar to
R-Car M3-W (R8A77960), the existing driver for R-Car M3-W is updated to
handle both.

To avoid confusion between R-Car M3-W and M3-W+, the existing config
symbol for M3-W is renamed to PINCTRL_PFC_R8A77960 in a dependency-free
way, and references to r8a7796 are updated.

Changes compared to v1[1]:
  - Split in per-subsystem series,
  - Add Reviewed-by, Tested-by,
  - Rename PINCTRL_PFC_R8A7796,
  - Update r8a7796 references,

I intend to queue this series in sh-pfc-for-v5.5.

Thanks for your comments!

[1] "[PATCH/RFC 00/19] arm64: dts: renesas: Initial support for R-Car M3-W+"
    https://lore.kernel.org/linux-renesas-soc/20191007102332.12196-1-geert+renesas@glider.be/

Geert Uytterhoeven (3):
  dt-bindings: pinctrl: sh-pfc: Document r8a77961 support
  pinctrl: sh-pfc: Rename PINCTRL_PFC_R8A7796 to PINCTRL_PFC_R8A77960
  pinctrl: sh-pfc: r8a7796: Add R8A77961 PFC support

 .../bindings/pinctrl/renesas,pfc-pinctrl.txt  |  3 +-
 drivers/pinctrl/sh-pfc/Kconfig                |  8 +++--
 drivers/pinctrl/sh-pfc/Makefile               |  3 +-
 drivers/pinctrl/sh-pfc/core.c                 | 10 ++++--
 drivers/pinctrl/sh-pfc/pfc-r8a7796.c          | 33 +++++++++++++++++--
 drivers/pinctrl/sh-pfc/sh_pfc.h               |  3 +-
 6 files changed, 50 insertions(+), 10 deletions(-)