mbox series

[v4,00/13] phy: usb: Updates to Broadcom STB USB PHY driver

Message ID 20200103181811.22939-1-alcooperx@gmail.com (mailing list archive)
Headers show
Series phy: usb: Updates to Broadcom STB USB PHY driver | expand

Message

Alan Cooper Jan. 3, 2020, 6:17 p.m. UTC
This patchset contains various updates to the Broadcom STB USB Driver.
The updates include:
- Add support for 7216 and 7211 Broadcom SoCs which use the new
  Synopsys USB Controller.
- Add support for USB Wake
- Add various bug fixes.


v4 - Fix mispelling, change Synopsis to Synopsys. Also add
     "Reviewed-by: Rob Herring" to bindings patch. There are no
     functional code changes in v4.

v3 - Rebase to v5.5-rc1

v2 - Changes based on review feedback
   - Add vendor prefix to DT property "syscon-piarbctl"
   - Use standard "wakeup" instead of "wake" for DT "interrupt-names"

Al Cooper (13):
  phy: usb: EHCI DMA may lose a burst of DMA data for 7255xA0 family
  phy: usb: Get all drivers that use USB clks using correct
    enable/disable
  phy: usb: Put USB phys into IDDQ on suspend to save power in S2 mode
  phy: usb: Add "wake on" functionality
  phy: usb: Restructure in preparation for adding 7216 USB support
  dt-bindings: Add Broadcom STB USB PHY binding document
  phy: usb: Add support for new Synopsys USB controller on the 7216
  phy: usb: Add support for new Synopsys USB controller on the 7211b0
  phy: usb: fix driver to defer on clk_get defer
  phy: usb: PHY's MDIO registers not accessible without device installed
  phy: usb: bdc: Fix occasional failure with BDC on 7211
  phy: usb: USB driver is crashing during S3 resume on 7216
  phy: usb: Add support for wake and USB low power mode for 7211 S2/S5

 .../bindings/phy/brcm,brcmstb-usb-phy.txt     |  69 ++-
 drivers/phy/broadcom/Makefile                 |   2 +-
 .../phy/broadcom/phy-brcm-usb-init-synopsys.c | 414 ++++++++++++++++++
 drivers/phy/broadcom/phy-brcm-usb-init.c      | 226 +++++-----
 drivers/phy/broadcom/phy-brcm-usb-init.h      | 148 ++++++-
 drivers/phy/broadcom/phy-brcm-usb.c           | 269 ++++++++++--
 6 files changed, 943 insertions(+), 185 deletions(-)
 create mode 100644 drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c

Comments

Kishon Vijay Abraham I Jan. 6, 2020, 5:25 a.m. UTC | #1
On 03/01/20 11:47 PM, Al Cooper wrote:
> This patchset contains various updates to the Broadcom STB USB Driver.
> The updates include:
> - Add support for 7216 and 7211 Broadcom SoCs which use the new
>   Synopsys USB Controller.
> - Add support for USB Wake
> - Add various bug fixes.

merged, thanks!

-Kishon
> 
> 
> v4 - Fix mispelling, change Synopsis to Synopsys. Also add
>      "Reviewed-by: Rob Herring" to bindings patch. There are no
>      functional code changes in v4.
> 
> v3 - Rebase to v5.5-rc1
> 
> v2 - Changes based on review feedback
>    - Add vendor prefix to DT property "syscon-piarbctl"
>    - Use standard "wakeup" instead of "wake" for DT "interrupt-names"
> 
> Al Cooper (13):
>   phy: usb: EHCI DMA may lose a burst of DMA data for 7255xA0 family
>   phy: usb: Get all drivers that use USB clks using correct
>     enable/disable
>   phy: usb: Put USB phys into IDDQ on suspend to save power in S2 mode
>   phy: usb: Add "wake on" functionality
>   phy: usb: Restructure in preparation for adding 7216 USB support
>   dt-bindings: Add Broadcom STB USB PHY binding document
>   phy: usb: Add support for new Synopsys USB controller on the 7216
>   phy: usb: Add support for new Synopsys USB controller on the 7211b0
>   phy: usb: fix driver to defer on clk_get defer
>   phy: usb: PHY's MDIO registers not accessible without device installed
>   phy: usb: bdc: Fix occasional failure with BDC on 7211
>   phy: usb: USB driver is crashing during S3 resume on 7216
>   phy: usb: Add support for wake and USB low power mode for 7211 S2/S5
> 
>  .../bindings/phy/brcm,brcmstb-usb-phy.txt     |  69 ++-
>  drivers/phy/broadcom/Makefile                 |   2 +-
>  .../phy/broadcom/phy-brcm-usb-init-synopsys.c | 414 ++++++++++++++++++
>  drivers/phy/broadcom/phy-brcm-usb-init.c      | 226 +++++-----
>  drivers/phy/broadcom/phy-brcm-usb-init.h      | 148 ++++++-
>  drivers/phy/broadcom/phy-brcm-usb.c           | 269 ++++++++++--
>  6 files changed, 943 insertions(+), 185 deletions(-)
>  create mode 100644 drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c
>