[0/4] thermal: k3: Add support for bandgap sensors

Message

J, KEERTHY Feb. 13, 2020, 10:24 a.m. UTC

Add VTM thermal support. In the Voltage Thermal
Management Module(VTM), K3 AM654 supplies a voltage
reference and a temperature sensor feature that are gathered in the band
gap voltage and temperature sensor (VBGAPTS) module. The band
gap provides current and voltage reference for its internal
circuits and other analog IP blocks. The analog-to-digital
converter (ADC) produces an output value that is proportional
to the silicon temperature.

Add support for bandgap sensors. Currently reading temperatures
and trend computing is supported. 

Keerthy (4):
  dt-bindings: thermal: k3: Add VTM bindings documentation
  thermal: k3: Add support for bandgap sensors
  arm64: dts: ti: am654: Add thermal zones
  arm64: dts: ti: am6: Add VTM node

 .../bindings/thermal/ti,am654-thermal.yaml    |  59 +++
 .../boot/dts/ti/am654-industrial-thermal.dtsi |  45 +++
 arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi    |  11 +
 drivers/thermal/Kconfig                       |  12 +
 drivers/thermal/Makefile                      |   1 +
 drivers/thermal/k3_bandgap.c                  | 342 ++++++++++++++++++
 6 files changed, 470 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml
 create mode 100644 arch/arm64/boot/dts/ti/am654-industrial-thermal.dtsi
 create mode 100644 drivers/thermal/k3_bandgap.c