mbox series

[v4,0/5] mainline Protonic boards

Message ID 20200330120640.9810-1-o.rempel@pengutronix.de (mailing list archive)
Headers show
Series mainline Protonic boards | expand

Message

Oleksij Rempel March 30, 2020, 12:06 p.m. UTC 
changes v4:
- VT7: fix typo

changes v3:
- move compatible to the start of node
- move status to the end
- use generic names in compatible
- refactor dts/dtsi
- use alphabet order for pinctrl and phandels
- remove unused or currently not supported nodes

changes v2:
- squash PRTI6Q patches

Oleksij Rempel (5):
  dt-bindings: vendor-prefixes: Add an entry for Protonic Holland
  ARM: dts: add Protonic PRTI6Q board
  ARM: dts: add Protonic WD2 board
  ARM: dts: add Protonic VT7 board
  ARM: dts: add Protonic RVT board

 .../devicetree/bindings/arm/fsl.yaml          |   4 +
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 arch/arm/boot/dts/Makefile                    |   4 +
 arch/arm/boot/dts/imx6dl-prtrvt.dts           | 203 +++++++
 arch/arm/boot/dts/imx6dl-prtvt7.dts           | 473 +++++++++++++++
 arch/arm/boot/dts/imx6q-prti6q.dts            | 551 ++++++++++++++++++
 arch/arm/boot/dts/imx6q-prtwd2.dts            | 188 ++++++
 arch/arm/boot/dts/imx6qdl-prti6q.dtsi         | 185 ++++++
 8 files changed, 1610 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx6dl-prtrvt.dts
 create mode 100644 arch/arm/boot/dts/imx6dl-prtvt7.dts
 create mode 100644 arch/arm/boot/dts/imx6q-prti6q.dts
 create mode 100644 arch/arm/boot/dts/imx6q-prtwd2.dts
 create mode 100644 arch/arm/boot/dts/imx6qdl-prti6q.dtsi