mbox series

[0/2] ARM: at91: Add initial support for SAMA5D2-ICP

Message ID 20200410164320.7658-1-cristian.birsan@microchip.com (mailing list archive)
Headers show
Series ARM: at91: Add initial support for SAMA5D2-ICP | expand

Message

Cristian Birsan April 10, 2020, 4:43 p.m. UTC 
From: Cristian Birsan <cristian.birsan@microchip.com>

This patch series adds initial support for SAMA5D2 Industrial
Communication Platform.

Codrin Ciubotariu (1):
  dt-bindings: ARM: Document SAMA5D2-ICP

Cristian Birsan (1):
  ARM: dts: at91: sama5d2-icp: add SAMA5D2-ICP

 .../devicetree/bindings/arm/atmel-at91.yaml   |   7 +
 arch/arm/boot/dts/Makefile                    |   1 +
 arch/arm/boot/dts/at91-sama5d2_icp.dts        | 797 ++++++++++++++++++
 3 files changed, 805 insertions(+)
 create mode 100644 arch/arm/boot/dts/at91-sama5d2_icp.dts

Comments

Alexandre Belloni April 13, 2020, 1:20 p.m. UTC | #1 
On 10/04/2020 19:43:18+0300, cristian.birsan@microchip.com wrote:
> From: Cristian Birsan <cristian.birsan@microchip.com>
> 
> This patch series adds initial support for SAMA5D2 Industrial
> Communication Platform.
> 
> Codrin Ciubotariu (1):
>   dt-bindings: ARM: Document SAMA5D2-ICP
> 
> Cristian Birsan (1):
>   ARM: dts: at91: sama5d2-icp: add SAMA5D2-ICP
> 
>  .../devicetree/bindings/arm/atmel-at91.yaml   |   7 +
>  arch/arm/boot/dts/Makefile                    |   1 +
>  arch/arm/boot/dts/at91-sama5d2_icp.dts        | 797 ++++++++++++++++++
>  3 files changed, 805 insertions(+)
>  create mode 100644 arch/arm/boot/dts/at91-sama5d2_icp.dts
> 
Applied, thanks.