mbox series

[v6,0/5] mainline Protonic boards

Message ID 20200421124057.19238-1-o.rempel@pengutronix.de (mailing list archive)
Headers show
Series mainline Protonic boards | expand

Message

Oleksij Rempel April 21, 2020, 12:40 p.m. UTC 
changes v6:
- move fsl.yaml changes to separate patch
- remove partitions, they are provided by the bootloader
- update flash compatible
- rename can3 to can
- fix fsl,mode
- fix interrupt in the wlan node on PRTI6Q

changes v5:
- PRTI6Q: remove status from the pwm-backlight node
- drop the vendor-prefixes patch, it is already taken by Rob
- add Reviewed-by: Rob Herring <robh@kernel.org>

changes v4:
- VT7: fix typo

changes v3:
- move compatible to the start of node
- move status to the end
- use generic names in compatible
- refactor dts/dtsi
- use alphabet order for pinctrl and phandels
- remove unused or currently not supported nodes

changes v2:
- squash PRTI6Q patches

Oleksij Rempel (5):
  ARM: dts: add Protonic PRTI6Q board
  ARM: dts: add Protonic WD2 board
  ARM: dts: add Protonic VT7 board
  ARM: dts: add Protonic RVT board
  dt-bindings: arm: fsl: add different Protonic boards

 .../devicetree/bindings/arm/fsl.yaml          |   4 +
 arch/arm/boot/dts/Makefile                    |   4 +
 arch/arm/boot/dts/imx6dl-prtrvt.dts           | 182 ++++++
 arch/arm/boot/dts/imx6dl-prtvt7.dts           | 472 ++++++++++++++++
 arch/arm/boot/dts/imx6q-prti6q.dts            | 529 ++++++++++++++++++
 arch/arm/boot/dts/imx6q-prtwd2.dts            | 188 +++++++
 arch/arm/boot/dts/imx6qdl-prti6q.dtsi         | 174 ++++++
 7 files changed, 1553 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx6dl-prtrvt.dts
 create mode 100644 arch/arm/boot/dts/imx6dl-prtvt7.dts
 create mode 100644 arch/arm/boot/dts/imx6q-prti6q.dts
 create mode 100644 arch/arm/boot/dts/imx6q-prtwd2.dts
 create mode 100644 arch/arm/boot/dts/imx6qdl-prti6q.dtsi