| Message ID | 20200503154215.23654-1-mani@kernel.org (mailing list archive) |
|---|---|
| Headers | show |
| Series | Add Stinger96 and IoT Box board support | expand |
Hi Mani On 5/3/20 5:42 PM, mani@kernel.org wrote: > From: Manivannan Sadhasivam <mani@kernel.org> > > Hello, > > This series adds Stinger96 and IoT Box board support. These boards are > based on STM32MP157A SoC, designed and manufactured by Shiratech solutions. > > The Stinger96 is a base board (96Boards IoT Extended edition) while IoT Box > adds one mezzanine on top of it and sold as a gateway device. > > This series depends on below patchsets already submitted and gone through > reviews: > > [PATCH v3 0/3] Add Reset and Wakeup support for CCS811 > [PATCH v3 0/2] Add CTS/RTS gpio support to STM32 UART > > More information about these boards can be found in below links: > > https://www.shiratech-solutions.com/products/stinger96/ > https://www.shiratech-solutions.com/products/iot-box/ > > Thanks, > Mani > Series applied on stm32-next. Regards Alex > Changes in v2: > > * Used "stm32" prefix for all DT commits > * Dropped custom sdmmc2 pinctrl node since existing node itself has pullup > enabled and works fine. > > Manivannan Sadhasivam (6): > dt-bindings: Add vendor prefix for Shiratech Solutions > ARM: dts: stm32: Add missing pinctrl entries for STM32MP15 > dt-bindings: arm: stm32: Document Stinger96 compatible > ARM: dts: stm32: Add Stinger96 board support > dt-bindings: arm: stm32: Document IoT Box compatible > ARM: dts: stm32: Add IoT Box board support > > .../devicetree/bindings/arm/stm32/stm32.yaml | 2 + > .../devicetree/bindings/vendor-prefixes.yaml | 2 + > arch/arm/boot/dts/Makefile | 2 + > arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 64 ++++ > arch/arm/boot/dts/stm32mp157a-iot-box.dts | 68 ++++ > arch/arm/boot/dts/stm32mp157a-stinger96.dts | 12 + > arch/arm/boot/dts/stm32mp157a-stinger96.dtsi | 342 ++++++++++++++++++ > 7 files changed, 492 insertions(+) > create mode 100644 arch/arm/boot/dts/stm32mp157a-iot-box.dts > create mode 100644 arch/arm/boot/dts/stm32mp157a-stinger96.dts > create mode 100644 arch/arm/boot/dts/stm32mp157a-stinger96.dtsi >
From: Manivannan Sadhasivam <mani@kernel.org> Hello, This series adds Stinger96 and IoT Box board support. These boards are based on STM32MP157A SoC, designed and manufactured by Shiratech solutions. The Stinger96 is a base board (96Boards IoT Extended edition) while IoT Box adds one mezzanine on top of it and sold as a gateway device. This series depends on below patchsets already submitted and gone through reviews: [PATCH v3 0/3] Add Reset and Wakeup support for CCS811 [PATCH v3 0/2] Add CTS/RTS gpio support to STM32 UART More information about these boards can be found in below links: https://www.shiratech-solutions.com/products/stinger96/ https://www.shiratech-solutions.com/products/iot-box/ Thanks, Mani Changes in v2: * Used "stm32" prefix for all DT commits * Dropped custom sdmmc2 pinctrl node since existing node itself has pullup enabled and works fine. Manivannan Sadhasivam (6): dt-bindings: Add vendor prefix for Shiratech Solutions ARM: dts: stm32: Add missing pinctrl entries for STM32MP15 dt-bindings: arm: stm32: Document Stinger96 compatible ARM: dts: stm32: Add Stinger96 board support dt-bindings: arm: stm32: Document IoT Box compatible ARM: dts: stm32: Add IoT Box board support .../devicetree/bindings/arm/stm32/stm32.yaml | 2 + .../devicetree/bindings/vendor-prefixes.yaml | 2 + arch/arm/boot/dts/Makefile | 2 + arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 64 ++++ arch/arm/boot/dts/stm32mp157a-iot-box.dts | 68 ++++ arch/arm/boot/dts/stm32mp157a-stinger96.dts | 12 + arch/arm/boot/dts/stm32mp157a-stinger96.dtsi | 342 ++++++++++++++++++ 7 files changed, 492 insertions(+) create mode 100644 arch/arm/boot/dts/stm32mp157a-iot-box.dts create mode 100644 arch/arm/boot/dts/stm32mp157a-stinger96.dts create mode 100644 arch/arm/boot/dts/stm32mp157a-stinger96.dtsi