[v8,0/3] PM / AVS: SVS: Introduce SVS engine

Message

Roger Lu May 18, 2020, 9:24 a.m. UTC

1. SVS driver use OPP adjust event in [1] to update OPP table voltage part.
2. SVS dts node refers to CPU opp table [2] and GPU opp table [3].
3. SVS and thermal dts use the same thermal efuse [4].
4. SVS dts needs power-domain [5][6] and PMIC regulator [7].

[1] https://patchwork.kernel.org/patch/11193513/
[2] https://patchwork.kernel.org/patch/11304935/
[3] https://patchwork.kernel.org/patch/11423009/
[4] https://patchwork.kernel.org/patch/11316495/
[5] https://lore.kernel.org/patchwork/patch/1236875/
[6] https://lore.kernel.org/patchwork/patch/1236878/
[7] https://patchwork.kernel.org/patch/11284617/

pending discussion:
- SVS sub-node architecture concern in below patch.
https://lore.kernel.org/patchwork/patch/1175994/
https://lore.kernel.org/patchwork/patch/1175994/

changes since v7:
- Add "mtk_svs.yaml" for device-tree binding document.
- Add svs_add_thermal_device_link() in driver for svs device (consumer)
to link thermal device (supplier).
- replace pm_qos_add_request() with cpu_latency_qos_add_request() for
letting CPUs leave idle-off state.

Roger Lu (3):
  dt-bindings: power: avs: add mtk svs dt-bindings
  arm64: dts: mt8183: add svs device information
  PM / AVS: SVS: Introduce SVS engine

 .../bindings/power/avs/mtk_svs.yaml           |  141 ++
 arch/arm64/boot/dts/mediatek/mt8183-evb.dts   |   16 +
 arch/arm64/boot/dts/mediatek/mt8183.dtsi      |   41 +
 drivers/power/avs/Kconfig                     |   10 +
 drivers/power/avs/Makefile                    |    1 +
 drivers/power/avs/mtk_svs.c                   | 2119 +++++++++++++++++
 include/linux/power/mtk_svs.h                 |   23 +
 7 files changed, 2351 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/power/avs/mtk_svs.yaml
 create mode 100644 drivers/power/avs/mtk_svs.c
 create mode 100644 include/linux/power/mtk_svs.h