| Message ID | 20200708071942.22595-1-frank@allwinnertech.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | Allwinner A100 Initial support | expand |
On Wed, Jul 08, 2020 at 03:19:26PM +0800, Frank Lee wrote: > This patch set adds initial support for allwinner a100 soc, > which is a 64-bit tablet chip. > Hello Does a product already exists with it ? I couldnt found any. Does a datasheet is availlable ? Regards
Hi, On Wed, Jul 08, 2020 at 03:19:26PM +0800, Frank Lee wrote: > This patch set adds initial support for allwinner a100 soc, > which is a 64-bit tablet chip. > > v3: > -Add pmu and nmi support > -Add read data mask for calibration > -Code style > -Some trivial things in yaml files > > v2: > -Some naming consistency > -Repair email address > -Fix mmc clock > -Don't export system clock > -Fix checkpatch warning > -Drop unneeded pin function, convert to jtag_gpu and i2s_x > > Frank Lee (16): > dt-bindings: clk: sunxi-ccu: add compatible string for A100 CCU and > R-CCU > clk: sunxi-ng: add support for the Allwinner A100 CCU > dt-bindings: pinctrl: sunxi: Add A100 pinctrl bindings > dt-bindings: pinctrl: sunxi: make gpio banks supplies required > pinctrl: sunxi: add support for the Allwinner A100 pin controller > dt-bindings: nvmem: SID: add binding for A100's SID controller > dt-bindings: thermal: sun8i: Add binding for A100's THS controller > thermal: sun8i: add TEMP_CALIB_MASK for calibration data in > sun50i_h6_ths_calibrate > thermal: sun8i: Add A100's THS controller support > mfd: axp20x: Allow the AXP803 to be probed by I2C > dt-bindings: irq: sun7i-nmi: fix dt-binding for a80 nmi > dt-bindings: irq: sun7i-nmi: Add binding for A100's NMI controller it doesn't look like those patches went through? > dt-bindings: i2c: mv64xxx: Add compatible for the A100 i2c node. > arm64: allwinner: A100: add the basical Allwinner A100 DTSI file > dt-bindings: arm: sunxi: Add Allwinner A100 Perf1 Board bindings > arm64: allwinner: A100: add support for Allwinner Perf1 board On a more general topic, which bootloader have you used to test this? The one from Allwinner's BSP I assume? Maxime
This patch set adds initial support for allwinner a100 soc, which is a 64-bit tablet chip. v3: -Add pmu and nmi support -Add read data mask for calibration -Code style -Some trivial things in yaml files v2: -Some naming consistency -Repair email address -Fix mmc clock -Don't export system clock -Fix checkpatch warning -Drop unneeded pin function, convert to jtag_gpu and i2s_x Frank Lee (16): dt-bindings: clk: sunxi-ccu: add compatible string for A100 CCU and R-CCU clk: sunxi-ng: add support for the Allwinner A100 CCU dt-bindings: pinctrl: sunxi: Add A100 pinctrl bindings dt-bindings: pinctrl: sunxi: make gpio banks supplies required pinctrl: sunxi: add support for the Allwinner A100 pin controller dt-bindings: nvmem: SID: add binding for A100's SID controller dt-bindings: thermal: sun8i: Add binding for A100's THS controller thermal: sun8i: add TEMP_CALIB_MASK for calibration data in sun50i_h6_ths_calibrate thermal: sun8i: Add A100's THS controller support mfd: axp20x: Allow the AXP803 to be probed by I2C dt-bindings: irq: sun7i-nmi: fix dt-binding for a80 nmi dt-bindings: irq: sun7i-nmi: Add binding for A100's NMI controller dt-bindings: i2c: mv64xxx: Add compatible for the A100 i2c node. arm64: allwinner: A100: add the basical Allwinner A100 DTSI file dt-bindings: arm: sunxi: Add Allwinner A100 Perf1 Board bindings arm64: allwinner: A100: add support for Allwinner Perf1 board Documentation/devicetree/bindings/arm/sunxi.yaml | 5 + .../bindings/clock/allwinner,sun4i-a10-ccu.yaml | 7 +- .../bindings/i2c/marvell,mv64xxx-i2c.yaml | 3 + .../allwinner,sun7i-a20-sc-nmi.yaml | 5 +- .../bindings/nvmem/allwinner,sun4i-a10-sid.yaml | 3 + .../pinctrl/allwinner,sun4i-a10-pinctrl.yaml | 75 +- .../bindings/thermal/allwinner,sun8i-a83t-ths.yaml | 6 +- arch/arm64/boot/dts/allwinner/Makefile | 1 + .../dts/allwinner/sun50i-a100-allwinner-perf1.dts | 180 +++ arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi | 364 ++++++ drivers/clk/sunxi-ng/Kconfig | 10 + drivers/clk/sunxi-ng/Makefile | 2 + drivers/clk/sunxi-ng/ccu-sun50i-a100-r.c | 214 ++++ drivers/clk/sunxi-ng/ccu-sun50i-a100-r.h | 21 + drivers/clk/sunxi-ng/ccu-sun50i-a100.c | 1276 ++++++++++++++++++++ drivers/clk/sunxi-ng/ccu-sun50i-a100.h | 56 + drivers/mfd/axp20x-i2c.c | 2 + drivers/pinctrl/sunxi/Kconfig | 10 + drivers/pinctrl/sunxi/Makefile | 2 + drivers/pinctrl/sunxi/pinctrl-sun50i-a100-r.c | 105 ++ drivers/pinctrl/sunxi/pinctrl-sun50i-a100.c | 708 +++++++++++ drivers/thermal/sun8i_thermal.c | 16 +- include/dt-bindings/clock/sun50i-a100-ccu.h | 116 ++ include/dt-bindings/clock/sun50i-a100-r-ccu.h | 23 + include/dt-bindings/reset/sun50i-a100-ccu.h | 68 ++ include/dt-bindings/reset/sun50i-a100-r-ccu.h | 18 + 26 files changed, 3262 insertions(+), 34 deletions(-) create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-a100-r.c create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-a100-r.h create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-a100.c create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-a100.h create mode 100644 drivers/pinctrl/sunxi/pinctrl-sun50i-a100-r.c create mode 100644 drivers/pinctrl/sunxi/pinctrl-sun50i-a100.c create mode 100644 include/dt-bindings/clock/sun50i-a100-ccu.h create mode 100644 include/dt-bindings/clock/sun50i-a100-r-ccu.h create mode 100644 include/dt-bindings/reset/sun50i-a100-ccu.h create mode 100644 include/dt-bindings/reset/sun50i-a100-r-ccu.h