mbox series

[0/6] arm64: dts: ti: Add USB support for J7200 EVM

Message ID 20200907103810.9870-1-rogerq@ti.com (mailing list archive)
Headers show
Series arm64: dts: ti: Add USB support for J7200 EVM | expand

Message

Roger Quadros Sept. 7, 2020, 10:38 a.m. UTC
Hi Tero/Nishanth,

This series adds USB2.0 support for the J7200 EVM.

Series is based on top of:

    Faiz's MMC/SD support series
    https://lore.kernel.org/lkml/20200907090520.25313-1-faiz_abbas@ti.com/
    Lokesh's initial support series
    https://patchwork.kernel.org/cover/11740039/
    Vignesh's I2C support series
    https://lore.kernel.org/patchwork/cover/1282152/
    Vignesh's Hyperflash series
    https://lore.kernel.org/patchwork/cover/1285326/

cheers,
-roger

Kishon Vijay Abraham I (1):
  arm64: dts: ti: k3-j7200-common-proc-board: Configure the SERDES lane
    function

Roger Quadros (5):
  dt-bindings: mux-j7200-wiz: Add lane function defines
  arm64: dts: ti: k3-j7200-main: Add SERDES lane control mux
  arm64: dts: ti: k3-j7200-main.dtsi: Add USB to SERDES lane MUX
  arm64: dts: ti: k3-j7200-main: Add USB controller
  arm64: dts: ti: k3-j7200-common-proc-board: Add USB support

 .../dts/ti/k3-j7200-common-proc-board.dts     | 28 ++++++++++
 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi     | 51 +++++++++++++++++++
 include/dt-bindings/mux/mux-j7200-wiz.h       | 29 +++++++++++
 3 files changed, 108 insertions(+)
 create mode 100644 include/dt-bindings/mux/mux-j7200-wiz.h

Comments

Nishanth Menon Sept. 7, 2020, 2:15 p.m. UTC | #1
On 13:38-20200907, Roger Quadros wrote:
> Hi Tero/Nishanth,
> 
> This series adds USB2.0 support for the J7200 EVM.
> 
> Series is based on top of:
> 
>     Faiz's MMC/SD support series
>     https://lore.kernel.org/lkml/20200907090520.25313-1-faiz_abbas@ti.com/
>     Lokesh's initial support series
>     https://patchwork.kernel.org/cover/11740039/
>     Vignesh's I2C support series
>     https://lore.kernel.org/patchwork/cover/1282152/
>     Vignesh's Hyperflash series
>     https://lore.kernel.org/patchwork/cover/1285326/
> 
> cheers,
> -roger
> 
> Kishon Vijay Abraham I (1):
>   arm64: dts: ti: k3-j7200-common-proc-board: Configure the SERDES lane
>     function
> 
> Roger Quadros (5):
>   dt-bindings: mux-j7200-wiz: Add lane function defines
>   arm64: dts: ti: k3-j7200-main: Add SERDES lane control mux
>   arm64: dts: ti: k3-j7200-main.dtsi: Add USB to SERDES lane MUX
>   arm64: dts: ti: k3-j7200-main: Add USB controller
>   arm64: dts: ti: k3-j7200-common-proc-board: Add USB support
> 
>  .../dts/ti/k3-j7200-common-proc-board.dts     | 28 ++++++++++
>  arch/arm64/boot/dts/ti/k3-j7200-main.dtsi     | 51 +++++++++++++++++++
>  include/dt-bindings/mux/mux-j7200-wiz.h       | 29 +++++++++++
>  3 files changed, 108 insertions(+)
>  create mode 100644 include/dt-bindings/mux/mux-j7200-wiz.h
> 

Too many warnings(W=2 and others) for me to look at this series
closer.