mbox series

[v6,0/1] Add basic node support for Mediatek MT8192 SoC

Message ID 20201030092207.26488-1-seiya.wang@mediatek.com (mailing list archive)
Headers show
Series Add basic node support for Mediatek MT8192 SoC | expand

Message

Seiya Wang Oct. 30, 2020, 9:22 a.m. UTC
MT8192 is a SoC based on 64bit ARMv8 architecture.
It contains 4 CA55 and 4 CA76 cores.
MT8192 share many HW IP with MT65xx series.
This patchset was tested on MT8192 evaluation board to shell.

Based on v5.10-rc1

Change in v6:
1. Remove including mt8192-clk.h
2. Use clk26m for spi clock

Change in v5:
1. Remove watchdog and all syscon nodes
2. Use clk26m for uart clock
3. Remove the dependency list

Change in v4:
1. Remove scpsys, spmi and apu nodes
2. Add i2c nodes
3. Update watchdog binding
4. Update dependency list

Change in v3:
Fix typo in binding document of timer

Change in v2:
1. Remove mt8192-power.h from mt8192.dtsi which is not used yet
2. Add timer binding document and device tree node in mt8192.dtsi
3. Remove watchdog driver modification

Seiya Wang (1):
  arm64: dts: Add Mediatek SoC MT8192 and evaluation board dts and
    Makefile

 arch/arm64/boot/dts/mediatek/Makefile       |   1 +
 arch/arm64/boot/dts/mediatek/mt8192-evb.dts |  29 ++
 arch/arm64/boot/dts/mediatek/mt8192.dtsi    | 512 ++++++++++++++++++++++++++++
 3 files changed, 542 insertions(+)
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8192-evb.dts
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8192.dtsi

--
2.14.1