[v2,0/6] arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini

Message

Jagan Teki Dec. 21, 2020, 11:31 a.m. UTC

This is the initial series to support Engicam i.Core MX8M Mini SOM
and it's associated carrier board dts(i) support.

i.Core MX8M Mini is an EDIMM SOM based on NXP i.MX8MM from Engicam.

i.Core MX8M Mini needs to mount on top of Engicam baseboards for
creating complete platform boards.

Possible baseboards are,
- EDIMM2.2
- C.TOUCH 2.0

Any inputs?
Jagan.

Jagan Teki (6):
  arm64: defconfig: Enable REGULATOR_PF8X00
  dt-bindings: arm: fsl: Add Engicam i.Core MX8M Mini C.TOUCH 2.0
  arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini SoM
  arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini C.TOUCH 2.0
  dt-bindings: arm: fsl: Add Engicam i.Core MX8M Mini EDIMM2.2 Starter Kit
  arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini EDIMM2.2 Starter Kit

 .../devicetree/bindings/arm/fsl.yaml          |   3 +
 arch/arm64/boot/dts/freescale/Makefile        |   2 +
 .../dts/freescale/imx8mm-engicam-common.dtsi  |  82 +++++++
 .../dts/freescale/imx8mm-engicam-ctouch2.dtsi |   7 +
 .../freescale/imx8mm-engicam-edimm2.2.dtsi    |   7 +
 .../freescale/imx8mm-icore-mx8mm-ctouch2.dts  |  21 ++
 .../freescale/imx8mm-icore-mx8mm-edimm2.2.dts |  21 ++
 .../dts/freescale/imx8mm-icore-mx8mm.dtsi     | 232 ++++++++++++++++++
 arch/arm64/configs/defconfig                  |   1 +
 9 files changed, 376 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-engicam-common.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-engicam-ctouch2.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-engicam-edimm2.2.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-ctouch2.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-edimm2.2.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm.dtsi