[net-next,v3,00/15] ACPI support for dpaa2 driver

Message

Calvin Johnson Jan. 12, 2021, 1:40 p.m. UTC

This patch set provides ACPI support to DPAA2 network drivers.

It also introduces new fwnode based APIs to support phylink and phy
layers
    Following functions are defined:
      phylink_fwnode_phy_connect()
      fwnode_mdiobus_register_phy()
      fwnode_mdiobus_register()
      fwnode_get_phy_id()
      fwnode_phy_find_device()
      device_phy_find_device()
      fwnode_get_phy_node()
      fwnode_mdio_find_device()
      fwnode_get_id()

    First one helps in connecting phy to phylink instance.
    Next three helps in getting phy_id and registering phy to mdiobus
    Next two help in finding a phy on a mdiobus.
    Next one helps in getting phy_node from a fwnode.
    Last one is used to get fwnode ID.

    Corresponding OF functions are refactored.
    END


Changes in v3:
- Add more info on legacy DT properties "phy" and "phy-device"
- Redefine fwnode_phy_find_device() to follow of_phy_find_device()
- Use traditional comparison pattern
- Use GENMASK
- Modified to retrieve reg property value for ACPI as well
- Resolved compilation issue with CONFIG_ACPI = n
- Added more info into documentation
- Use acpi_mdiobus_register()
- Avoid unnecessary line removal
- Remove unused inclusion of acpi.h

Changes in v2:
- Updated with more description in document
- use reverse christmas tree ordering for local variables
- Refactor OF functions to use fwnode functions

Calvin Johnson (15):
  Documentation: ACPI: DSD: Document MDIO PHY
  net: phy: Introduce fwnode_mdio_find_device()
  net: phy: Introduce phy related fwnode functions
  of: mdio: Refactor of_phy_find_device()
  net: phy: Introduce fwnode_get_phy_id()
  of: mdio: Refactor of_get_phy_id()
  net: mdiobus: Introduce fwnode_mdiobus_register_phy()
  of: mdio: Refactor of_mdiobus_register_phy()
  device property: Introduce fwnode_get_id()
  net: mdio: Add ACPI support code for mdio
  net: mdiobus: Introduce fwnode_mdiobus_register()
  net/fsl: Use fwnode_mdiobus_register()
  phylink: introduce phylink_fwnode_phy_connect()
  net: phylink: Refactor phylink_of_phy_connect()
  net: dpaa2-mac: Add ACPI support for DPAA2 MAC driver

 Documentation/firmware-guide/acpi/dsd/phy.rst | 129 ++++++++++++++++++
 MAINTAINERS                                   |   1 +
 drivers/base/property.c                       |  33 +++++
 .../net/ethernet/freescale/dpaa2/dpaa2-mac.c  |  87 +++++++-----
 drivers/net/ethernet/freescale/xgmac_mdio.c   |  12 +-
 drivers/net/mdio/Kconfig                      |   7 +
 drivers/net/mdio/Makefile                     |   1 +
 drivers/net/mdio/acpi_mdio.c                  |  49 +++++++
 drivers/net/mdio/of_mdio.c                    |  79 +----------
 drivers/net/phy/mdio_bus.c                    |  87 ++++++++++++
 drivers/net/phy/phy_device.c                  | 106 ++++++++++++++
 drivers/net/phy/phylink.c                     |  49 ++++---
 include/linux/acpi_mdio.h                     |  27 ++++
 include/linux/mdio.h                          |   2 +
 include/linux/of_mdio.h                       |   6 +-
 include/linux/phy.h                           |  32 +++++
 include/linux/phylink.h                       |   3 +
 include/linux/property.h                      |   1 +
 18 files changed, 579 insertions(+), 132 deletions(-)
 create mode 100644 Documentation/firmware-guide/acpi/dsd/phy.rst
 create mode 100644 drivers/net/mdio/acpi_mdio.c
 create mode 100644 include/linux/acpi_mdio.h