mbox series

[v4,0/2] add Kontron pITX-imx8m board

Message ID 20210303211002.17650-1-heiko.thiery@gmail.com (mailing list archive)
Headers show
Series add Kontron pITX-imx8m board | expand

Message

Heiko Thiery March 3, 2021, 9:10 p.m. UTC 
This patch series adds support for the Kontron pITX-imx8m board:

https://www.kontron.com/products/boards-and-standard-form-factors/single-board-computer/pitx-imx8m.html

Heiko Thiery (2):
  dt-bindings: arm: fsl: add Kontron pITX-imx8m board
  arm64: dts: fsl: add support for Kontron pitx-imx8m board

 .../devicetree/bindings/arm/fsl.yaml          |   1 +
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../freescale/imx8mq-kontron-pitx-imx8m.dts   | 611 ++++++++++++++++++
 3 files changed, 613 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts

Comments

Shawn Guo March 8, 2021, 1:26 a.m. UTC | #1 
On Wed, Mar 03, 2021 at 10:10:01PM +0100, Heiko Thiery wrote:
> This patch series adds support for the Kontron pITX-imx8m board:
> 
> https://www.kontron.com/products/boards-and-standard-form-factors/single-board-computer/pitx-imx8m.html
> 
> Heiko Thiery (2):
>   dt-bindings: arm: fsl: add Kontron pITX-imx8m board
>   arm64: dts: fsl: add support for Kontron pitx-imx8m board

Applied both, thanks.