mbox series

[v5,00/16] Clean up "mediatek,larb"

Message ID 20210410091128.31823-1-yong.wu@mediatek.com (mailing list archive)
Headers show
Series Clean up "mediatek,larb" | expand

Message

Yong Wu (吴勇) April 10, 2021, 9:11 a.m. UTC
MediaTek IOMMU block diagram always like below:

        M4U
         |
    smi-common
         |
  -------------
  |         |  ...
  |         |
larb1     larb2
  |         |
vdec       venc

All the consumer connect with smi-larb, then connect with smi-common.

When the consumer works, it should enable the smi-larb's power which also
need enable the smi-common's power firstly.

Thus, Firstly, use the device link connect the consumer and the
smi-larbs. then add device link between the smi-larb and smi-common.

After adding the device_link, then "mediatek,larb" property can be removed.
the iommu consumer don't need call the mtk_smi_larb_get/put to enable
the power and clock of smi-larb and smi-common.

About the MM dt-bindings/dtsi patches, I guess they will go through Matthias's
tree, so I don't split them for each a MM module and each a SoC.

This patchset base on v5.12-rc2 and a vcodec patchset(separating its node)[1]
which has already been in linux-next.

[1] https://lore.kernel.org/linux-mediatek/20210325122625.15100-1-irui.wang@mediatek.com/

Change notes:
v5: 1) Base on v5.12-rc2.
    2) Remove changing the mtk-iommu to module_platform_driver patch, It have
    already been a independent patch.
    3) Add several patches for the MM drivers with pm_runtime_resume_and_get
    instead of pm_runtime_get_sync since smi already use it.

v4: https://lore.kernel.org/linux-mediatek/1590826218-23653-1-git-send-email-yong.wu@mediatek.com/ 
    base on v5.7-rc1.
  1) Move drm PM patch before smi patchs.
  2) Change builtin_platform_driver to module_platform_driver since we may need
     build as module.
  3) Rebase many patchset as above.

v3: https://lore.kernel.org/linux-iommu/1567503456-24725-1-git-send-email-yong.wu@mediatek.com/
    1) rebase on v5.3-rc1 and the latest mt8183 patchset.
    2) Use device_is_bound to check whether the driver is ready from Matthias.    
    3) Add DL_FLAG_STATELESS flag when calling device_link_add and explain the
   reason in the commit message[3/14].
    4) Add a display patch[12/14] into this series. otherwise it may affect
   display HW fastlogo even though it don't happen in mt8183.
   
v2: https://lore.kernel.org/linux-iommu/1560171313-28299-1-git-send-email-yong.wu@mediatek.com/
   1) rebase on v5.2-rc1.
   2) Move adding device_link between the consumer and smi-larb into
iommu_add_device from Robin.
   3) add DL_FLAG_AUTOREMOVE_CONSUMER even though the smi is built-in from Evan.
   4) Remove the shutdown callback in iommu.   

v1: https://lore.kernel.org/linux-iommu/1546318276-18993-1-git-send-email-yong.wu@mediatek.com/

Yong Wu (15):
  dt-binding: mediatek: Get rid of mediatek,larb for multimedia HW
  iommu/mediatek: Add probe_defer for smi-larb
  iommu/mediatek: Add device_link between the consumer and the larb
    devices
  memory: mtk-smi: Add device-link between smi-larb and smi-common
  media: mtk-jpeg: Use pm_runtime_resume_and_get for PM get_sync
  media: mtk-jpeg: Get rid of mtk_smi_larb_get/put
  media: mtk-mdp: Use pm_runtime_resume_and_get for PM get_sync
  media: mtk-mdp: Get rid of mtk_smi_larb_get/put
  drm/mediatek: Use pm_runtime_resume_and_get for PM get_sync
  drm/mediatek: Get rid of mtk_smi_larb_get/put
  media: mtk-vcodec: Use pm_runtime_resume_and_get for PM get_sync
  media: mtk-vcodec: Get rid of mtk_smi_larb_get/put
  memory: mtk-smi: Get rid of mtk_smi_larb_get/put
  arm: dts: mediatek: Get rid of mediatek,larb for MM nodes
  arm64: dts: mediatek: Get rid of mediatek,larb for MM nodes

Yongqiang Niu (1):
  drm/mediatek: Add pm runtime support for ovl and rdma

 .../display/mediatek/mediatek,disp.txt        |  9 ----
 .../bindings/media/mediatek-jpeg-decoder.txt  |  4 --
 .../bindings/media/mediatek-jpeg-encoder.txt  |  4 --
 .../bindings/media/mediatek-mdp.txt           |  8 ----
 .../bindings/media/mediatek-vcodec.txt        |  4 --
 arch/arm/boot/dts/mt2701.dtsi                 |  2 -
 arch/arm/boot/dts/mt7623n.dtsi                |  5 --
 arch/arm64/boot/dts/mediatek/mt8173.dtsi      | 16 -------
 arch/arm64/boot/dts/mediatek/mt8183.dtsi      |  5 --
 drivers/gpu/drm/mediatek/mtk_disp_ovl.c       |  9 +++-
 drivers/gpu/drm/mediatek/mtk_disp_rdma.c      |  9 +++-
 drivers/gpu/drm/mediatek/mtk_drm_crtc.c       | 21 +++++----
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c   | 35 --------------
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h   |  1 -
 drivers/gpu/drm/mediatek/mtk_drm_drv.c        |  5 +-
 drivers/iommu/mtk_iommu.c                     | 24 +++++++++-
 drivers/iommu/mtk_iommu_v1.c                  | 22 ++++++++-
 .../media/platform/mtk-jpeg/mtk_jpeg_core.c   | 34 ++------------
 .../media/platform/mtk-jpeg/mtk_jpeg_core.h   |  2 -
 drivers/media/platform/mtk-mdp/mtk_mdp_comp.c | 40 ----------------
 drivers/media/platform/mtk-mdp/mtk_mdp_comp.h |  2 -
 drivers/media/platform/mtk-mdp/mtk_mdp_core.c |  1 -
 drivers/media/platform/mtk-mdp/mtk_mdp_m2m.c  |  4 +-
 .../platform/mtk-vcodec/mtk_vcodec_dec_pm.c   | 42 ++++-------------
 .../platform/mtk-vcodec/mtk_vcodec_drv.h      |  3 --
 .../platform/mtk-vcodec/mtk_vcodec_enc.c      |  1 -
 .../platform/mtk-vcodec/mtk_vcodec_enc_pm.c   | 46 ++-----------------
 drivers/memory/mtk-smi.c                      | 33 ++++---------
 include/soc/mediatek/smi.h                    | 20 --------
 29 files changed, 99 insertions(+), 312 deletions(-)

Comments

Krzysztof Kozlowski April 13, 2021, 2:58 p.m. UTC | #1
On Sat, 10 Apr 2021 17:11:12 +0800, Yong Wu wrote:
> MediaTek IOMMU block diagram always like below:
> 
>         M4U
>          |
>     smi-common
>          |
>   -------------
>   |         |  ...
>   |         |
> larb1     larb2
>   |         |
> vdec       venc
> 
> [...]

Applied, thanks!

[04/16] memory: mtk-smi: Add device-link between smi-larb and smi-common
        commit: 6ce2c05b21189eb17b3aa26720cc5841acf9dce8

Best regards,