| Message ID | 20210608104757.582199-1-andrew@aj.id.au (mailing list archive) |
|---|---|
| Headers | show |
| Series | ipmi: Allow raw access to KCS devices | expand |
On Tue, Jun 08, 2021 at 08:17:41PM +0930, Andrew Jeffery wrote: > > Hello, > > This is the 4th spin of the series refactoring the keyboard-controller-style > device drivers in the IPMI subsystem. Ok, no comments and everything looks good, I have this queued for the next Linux release. Thanks, -corey > > v3 can be found at: > > https://lore.kernel.org/lkml/20210510054213.1610760-1-andrew@aj.id.au/ > > v4: > > * Makes kcs_bmc_add_device() return an error if no client successfully > initialised with respect to the binding of the device driver > * Retains the existing single-open semantics (v3 allowed multiple-open) > * Fixes the OBE macro for the NPCM7xx KCS driver > * Cleans up Yoda-style masks (mask constant on the LHS rather than RHS) > * Cleans up includes in kcs_bmc_client.h > * Adds some comments to the SerIO adapter to clarify object lifetimes > > Previously: > > Changes in v3: > > * The series was rebased onto v5.13-rc1 > * v5.13-rc1 includes Chiawei's patches reworking the LPC devicetree bindings, > so they're no-longer required in the series. > * After some discussion with Arnd[1] and investigating the serio subsystem, > I've replaced the "raw" KCS driver (patch 16/21 in v2) with a serio adaptor > (patch 11/16 in this series). The adaptor allows us to take advantage of the > existing chardevs provided by serio. > > [1] https://lore.kernel.org/linux-arm-kernel/37e75b07-a5c6-422f-84b3-54f2bea0b917@www.fastmail.com/ > > Changes in v2 include: > > * A rebase onto v5.12-rc2 > * Incorporation of off-list feedback on SerIRQ configuration from > Chiawei > * Further validation on hardware for ASPEED KCS devices 2, 3 and 4 > * Lifting the existing single-open constraint of the IPMI chardev > * Fixes addressing Rob's feedback on the conversion of the ASPEED KCS > binding to dt-schema > * Fixes addressing Rob's feedback on the new aspeed,lpc-interrupts > property definition for the ASPEED KCS binding > > Please test and review! > > Andrew > > Andrew Jeffery (16): > ipmi: kcs_bmc_aspeed: Use of match data to extract KCS properties > ipmi: kcs_bmc: Make status update atomic > ipmi: kcs_bmc: Rename {read,write}_{status,data}() functions > ipmi: kcs_bmc: Split out kcs_bmc_cdev_ipmi > ipmi: kcs_bmc: Turn the driver data-structures inside-out > ipmi: kcs_bmc: Split headers into device and client > ipmi: kcs_bmc: Strip private client data from struct kcs_bmc > ipmi: kcs_bmc: Decouple the IPMI chardev from the core > ipmi: kcs_bmc: Allow clients to control KCS IRQ state > ipmi: kcs_bmc: Enable IBF on open > ipmi: kcs_bmc: Add serio adaptor > dt-bindings: ipmi: Convert ASPEED KCS binding to schema > dt-bindings: ipmi: Add optional SerIRQ property to ASPEED KCS devices > ipmi: kcs_bmc_aspeed: Implement KCS SerIRQ configuration > ipmi: kcs_bmc_aspeed: Fix IBFIE typo from datasheet > ipmi: kcs_bmc_aspeed: Optionally apply status address > > .../bindings/ipmi/aspeed,ast2400-kcs-bmc.yaml | 106 +++ > .../bindings/ipmi/aspeed-kcs-bmc.txt | 33 - > drivers/char/ipmi/Kconfig | 27 + > drivers/char/ipmi/Makefile | 2 + > drivers/char/ipmi/kcs_bmc.c | 523 ++++----------- > drivers/char/ipmi/kcs_bmc.h | 92 +-- > drivers/char/ipmi/kcs_bmc_aspeed.c | 633 +++++++++++++----- > drivers/char/ipmi/kcs_bmc_cdev_ipmi.c | 568 ++++++++++++++++ > drivers/char/ipmi/kcs_bmc_client.h | 45 ++ > drivers/char/ipmi/kcs_bmc_device.h | 22 + > drivers/char/ipmi/kcs_bmc_npcm7xx.c | 92 ++- > drivers/char/ipmi/kcs_bmc_serio.c | 157 +++++ > 12 files changed, 1594 insertions(+), 706 deletions(-) > create mode 100644 Documentation/devicetree/bindings/ipmi/aspeed,ast2400-kcs-bmc.yaml > delete mode 100644 Documentation/devicetree/bindings/ipmi/aspeed-kcs-bmc.txt > create mode 100644 drivers/char/ipmi/kcs_bmc_cdev_ipmi.c > create mode 100644 drivers/char/ipmi/kcs_bmc_client.h > create mode 100644 drivers/char/ipmi/kcs_bmc_device.h > create mode 100644 drivers/char/ipmi/kcs_bmc_serio.c > > -- > 2.30.2 >
On Wed, 16 Jun 2021, at 04:16, Corey Minyard wrote: > On Tue, Jun 08, 2021 at 08:17:41PM +0930, Andrew Jeffery wrote: > > > > Hello, > > > > This is the 4th spin of the series refactoring the keyboard-controller-style > > device drivers in the IPMI subsystem. > > Ok, no comments and everything looks good, I have this queued for the > next Linux release. Thanks! Andrew
Hello, This is the 4th spin of the series refactoring the keyboard-controller-style device drivers in the IPMI subsystem. v3 can be found at: https://lore.kernel.org/lkml/20210510054213.1610760-1-andrew@aj.id.au/ v4: * Makes kcs_bmc_add_device() return an error if no client successfully initialised with respect to the binding of the device driver * Retains the existing single-open semantics (v3 allowed multiple-open) * Fixes the OBE macro for the NPCM7xx KCS driver * Cleans up Yoda-style masks (mask constant on the LHS rather than RHS) * Cleans up includes in kcs_bmc_client.h * Adds some comments to the SerIO adapter to clarify object lifetimes Previously: Changes in v3: * The series was rebased onto v5.13-rc1 * v5.13-rc1 includes Chiawei's patches reworking the LPC devicetree bindings, so they're no-longer required in the series. * After some discussion with Arnd[1] and investigating the serio subsystem, I've replaced the "raw" KCS driver (patch 16/21 in v2) with a serio adaptor (patch 11/16 in this series). The adaptor allows us to take advantage of the existing chardevs provided by serio. [1] https://lore.kernel.org/linux-arm-kernel/37e75b07-a5c6-422f-84b3-54f2bea0b917@www.fastmail.com/ Changes in v2 include: * A rebase onto v5.12-rc2 * Incorporation of off-list feedback on SerIRQ configuration from Chiawei * Further validation on hardware for ASPEED KCS devices 2, 3 and 4 * Lifting the existing single-open constraint of the IPMI chardev * Fixes addressing Rob's feedback on the conversion of the ASPEED KCS binding to dt-schema * Fixes addressing Rob's feedback on the new aspeed,lpc-interrupts property definition for the ASPEED KCS binding Please test and review! Andrew Andrew Jeffery (16): ipmi: kcs_bmc_aspeed: Use of match data to extract KCS properties ipmi: kcs_bmc: Make status update atomic ipmi: kcs_bmc: Rename {read,write}_{status,data}() functions ipmi: kcs_bmc: Split out kcs_bmc_cdev_ipmi ipmi: kcs_bmc: Turn the driver data-structures inside-out ipmi: kcs_bmc: Split headers into device and client ipmi: kcs_bmc: Strip private client data from struct kcs_bmc ipmi: kcs_bmc: Decouple the IPMI chardev from the core ipmi: kcs_bmc: Allow clients to control KCS IRQ state ipmi: kcs_bmc: Enable IBF on open ipmi: kcs_bmc: Add serio adaptor dt-bindings: ipmi: Convert ASPEED KCS binding to schema dt-bindings: ipmi: Add optional SerIRQ property to ASPEED KCS devices ipmi: kcs_bmc_aspeed: Implement KCS SerIRQ configuration ipmi: kcs_bmc_aspeed: Fix IBFIE typo from datasheet ipmi: kcs_bmc_aspeed: Optionally apply status address .../bindings/ipmi/aspeed,ast2400-kcs-bmc.yaml | 106 +++ .../bindings/ipmi/aspeed-kcs-bmc.txt | 33 - drivers/char/ipmi/Kconfig | 27 + drivers/char/ipmi/Makefile | 2 + drivers/char/ipmi/kcs_bmc.c | 523 ++++----------- drivers/char/ipmi/kcs_bmc.h | 92 +-- drivers/char/ipmi/kcs_bmc_aspeed.c | 633 +++++++++++++----- drivers/char/ipmi/kcs_bmc_cdev_ipmi.c | 568 ++++++++++++++++ drivers/char/ipmi/kcs_bmc_client.h | 45 ++ drivers/char/ipmi/kcs_bmc_device.h | 22 + drivers/char/ipmi/kcs_bmc_npcm7xx.c | 92 ++- drivers/char/ipmi/kcs_bmc_serio.c | 157 +++++ 12 files changed, 1594 insertions(+), 706 deletions(-) create mode 100644 Documentation/devicetree/bindings/ipmi/aspeed,ast2400-kcs-bmc.yaml delete mode 100644 Documentation/devicetree/bindings/ipmi/aspeed-kcs-bmc.txt create mode 100644 drivers/char/ipmi/kcs_bmc_cdev_ipmi.c create mode 100644 drivers/char/ipmi/kcs_bmc_client.h create mode 100644 drivers/char/ipmi/kcs_bmc_device.h create mode 100644 drivers/char/ipmi/kcs_bmc_serio.c