[0/9] fixes and enablement for rk356x

Message

Peter Geis July 28, 2021, 1:55 p.m. UTC

Good Morning,

This series aims to fix some early issues with the rk356x and enable
nodes that are currently supported by the available drivers.

1. increases the max clocks in the dt-bindings to permit patch 3.
2. fixes the mbi-alias, which points to the wrong location
3. adds the gpio debounce clocks which are necessary for gpio to bind
4. adds the common gmac1 node
5. adds the tsadc nodes
6. adds the missing cru and pmucru phandles necessary to reclock
7. adjusts the gpll and ppll clocks to better support hardware
8. enables the gmac1 on the Quartz64
9. adds thermal support to the Quartz64

Peter Geis (9):
  dt-bindings: gpio: rockchip,gpio-bank: increase max clocks
  arm64: dts: rockchip: fix rk3568 mbi-alias
  arm64: dts: rockchip: add rk356x gpio debounce clocks
  arm64: dts: rockchip: add rk356x gmac1 node
  arm64: dts: rockchip: add rk3568 tsadc nodes
  arm64: dts: rockchip: add missing rk3568 cru phandles
  arm64: dts: rockchip: adjust rk3568 pll clocks
  arm64: dts: rockchip: enable gmac node on quartz64-a
  arm64: dts: rockchip: add thermal support to Quartz64 Model A

 .../bindings/gpio/rockchip,gpio-bank.yaml     |   2 +-
 .../boot/dts/rockchip/rk3566-quartz64-a.dts   |  66 +++++++++
 .../boot/dts/rockchip/rk3568-pinctrl.dtsi     |   6 +
 arch/arm64/boot/dts/rockchip/rk356x.dtsi      | 136 +++++++++++++++++-
 4 files changed, 203 insertions(+), 7 deletions(-)