mbox series

[RFC,0/4] Fix and improve gpmi nand on mx28

Message ID 20211217155512.1877408-1-dario.binacchi@amarulasolutions.com (mailing list archive)
Headers show
Series Fix and improve gpmi nand on mx28 | expand

Message

Dario Binacchi Dec. 17, 2021, 3:55 p.m. UTC 
Starting from [1], the series fixes the timings setting of the gpmi
controller for the mx28 architecture, also adding support for fast
edo mode timings. The whole series has been heavily tested with the
mtd kernel test modules, and with repeated write cycles on nand.

The patches of the series were applied after applying patches [2]
and [3] which at the moment are already in nand-next.

[1] https://lore.kernel.org/r/20210702065350.209646-5-ebiggers@kernel.org
[2] 73b68455f8ac ("mtd: rawnand: gpmi: Remove explicit default gpmi clock setting for i.MX6")
[3] 7944f8346983 ("mtd: rawnand: gpmi: Add ERR007117 protection for nfc_apply_timings")


Dario Binacchi (3):
  mtd: rawnand: gpmi: support fast edo timings for mx28
  mtd: rawnand: gpmi: fix controller timings setting
  mtd: rawnand: gpmi: validate controller clock rate

Michael Trimarchi (1):
  clk: mxs: imx28: Reparent gpmi clk to ref_gpmi

 drivers/clk/mxs/clk-imx28.c                |  3 +
 drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 75 +++++++++++++++++-----
 2 files changed, 61 insertions(+), 17 deletions(-)