mbox series

[0/6] ARM: dts: bcm283x: Adjust GPIO line names

Message ID 20220411200143.4876-1-stefan.wahren@i2se.com (mailing list archive)
Headers show
Series ARM: dts: bcm283x: Adjust GPIO line names | expand

Message

Stefan Wahren April 11, 2022, 8:01 p.m. UTC 
Recently the GPIO line names has been added to the vendor tree
DTB [1], which include some fixes (all patches except #5).

While we are at this remove those Not Connected (NC) line names.

[1] - https://github.com/raspberrypi/linux/issues/2760

Phil Elwell (4):
  ARM: dts: bcm2835-rpi-zero-w: Fix GPIO line name for Wifi/BT
  ARM: dts: bcm2837-rpi-cm3-io3: Fix GPIO line names for SMPS I2C
  ARM: dts: bcm2837-rpi-3-b-plus: Fix GPIO line name of power LED
  ARM: dts: bcm283x: Align ETH_CLK GPIO line name

Stefan Wahren (2):
  ARM: dts: bcm2835-rpi-b: Fix GPIO line names
  ARM: dts: bcm283x: Remove gpio line name NC

 arch/arm/boot/dts/bcm2835-rpi-a-plus.dts   | 21 +++++-----
 arch/arm/boot/dts/bcm2835-rpi-a.dts        | 35 ++++++++--------
 arch/arm/boot/dts/bcm2835-rpi-b-plus.dts   | 19 ++++-----
 arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts   | 35 ++++++++--------
 arch/arm/boot/dts/bcm2835-rpi-b.dts        | 48 +++++++++++-----------
 arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts  |  1 -
 arch/arm/boot/dts/bcm2835-rpi-zero-w.dts   | 25 +++++------
 arch/arm/boot/dts/bcm2835-rpi-zero.dts     | 29 +++++++------
 arch/arm/boot/dts/bcm2836-rpi-2-b.dts      |  3 +-
 arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts |  1 -
 arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts |  5 +--
 arch/arm/boot/dts/bcm2837-rpi-3-b.dts      |  3 +-
 arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts  |  5 +--
 arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi     | 12 +++---
 14 files changed, 115 insertions(+), 127 deletions(-)