mbox series

[v2,0/2] mainline Protonic PRTT1x boards

Message ID 20220422071034.2882199-1-o.rempel@pengutronix.de (mailing list archive)
Headers show
Series mainline Protonic PRTT1x boards | expand

Message

Oleksij Rempel April 22, 2022, 7:10 a.m. UTC 
changes v2:
- cleanup mmc nodes
- disabled dma for uart4 (this is console interface and it should work
  as simple as possible)

Oleksij Rempel (2):
  dt-bindings: arm: stm32: Add compatible strings for Protonic T1L
    boards
  ARM: dts: stm32: add support for Protonic PRTT1x boards

 .../devicetree/bindings/arm/stm32/stm32.yaml  |   6 +
 arch/arm/boot/dts/Makefile                    |   4 +
 arch/arm/boot/dts/stm32mp151a-prtt1a.dts      |  52 +++
 arch/arm/boot/dts/stm32mp151a-prtt1c.dts      | 321 ++++++++++++++++++
 arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi     | 213 ++++++++++++
 arch/arm/boot/dts/stm32mp151a-prtt1s.dts      |  63 ++++
 6 files changed, 659 insertions(+)
 create mode 100644 arch/arm/boot/dts/stm32mp151a-prtt1a.dts
 create mode 100644 arch/arm/boot/dts/stm32mp151a-prtt1c.dts
 create mode 100644 arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi
 create mode 100644 arch/arm/boot/dts/stm32mp151a-prtt1s.dts