mbox series

[v6,0/8] ASoC: mediatek: Add support for MT8186 SoC

Message ID 20220607142046.28060-1-jiaxin.yu@mediatek.com (mailing list archive)
Headers show
Series ASoC: mediatek: Add support for MT8186 SoC | expand

Message

Jiaxin Yu June 7, 2022, 2:20 p.m. UTC
This series of patches adds support for Mediatek AFE of MT8186 Soc.
Patches are based on broonie tree "for-next" branch.

Changes since v5:
  - fix build error about function snd_soc_card_jack_new that modified by:
    Link: https://lore.kernel.org/r/20220408041114.6024-1-akihiko.odaki@gmail.com
  - some have been accepted, details are in the link below:
    Link: https://lore.kernel.org/all/165459931885.399031.2621579592368573898.b4-ty@kernel.org/

Changes since v4:
  - [v5 07/20]
    - remove unsusd controls
  - [v5 09/20]
    - correct indent error
  - [v5 10/20]
  - [v5 13/20]
  - [v5 14/20]
    - fix the return value if the value is different from the previous
      value in mixer controls
  - [v5 17/20]
  - [v5 19/20]
    - correct the compatible name with '_' instead of '-'
  - [v5 18/20]
  - [v5 20/20]
    - correct the yaml after 'pip3 install dtschema --upgrade'

Changes since v3:
  - [v4 09/18]
    - remove DEBUG_COEFF debugging code
  - [v4 10/18]
    - simplify the logic of the code
  - [v4 13/18]
    - split out the MT6366 bits into mt8186-mt6366-commom.c
    - fix build error of "error: 'struct dev_pm_info' has no member named 'runtime_error'"
    - fix bug of adda dai driver
    - add route for pcm interface channel 2.
  - [v4 15/18]
  - [v4 17/18]
    - commonize the configuration of the codec
    - move MT6366 common bits into mt8186-mt6366-common.c

Changes since v2:
  - add a new compatible string "mediatek,mt6366-sound"
  - modify the log level for simplicity
  - use dev_err_probe(...) instead of dev_err(...) in dev probe()
  - optimized the logic of some code
  - use BIT() and GENMASK() macros to descript the registers

  Thanks for AngeloGioacchino's careful reviews.

Changes since v1:
  [v2 01/17]
    - add a new ID to the existing mt6358 codec driver
  [v2 03/17]
    - modify log level in DAPM events
    - use standard numeric control with name ending in Switch
    - return 1 when the value changed in mixer control's .get callback
  [v2 05/17]
    - ending in Switch to the standard on/off controls
    - change to "HW Gain 1 Volume" and "HW Gain 2 Volume"
  [v2 09/17]
    - return an error in the default case rather than just picking one of
      the behaviours when do .set_fmt
    - use the new defines that are _PROVIDER_MASK, _DAIFMT_CBP_CFP and
      _DAIFMT_CBC_CFC
  [v2 10/17]
  [v2 11/17]
    - the clock and gpio are aplit out into separate  patches

  The source file's GPL comment use c++ style, and the header fils's GPL
  comment use c style. We have added "Switch" after the names of all the
  controls that just are simple on/off.

Jiaxin Yu (8):
  dt-bindings: mediatek: mt6358: add new compatible for using mt6366
  ASoC: mediatek: mt8186: add platform driver
  ASoC: mediatek: mt8186: add mt8186-mt6366 common driver
  dt-bindings: mediatek: mt8186: add audio afe document
  ASoC: mediatek: mt8186: add machine driver with mt6366, da7219 and
    max98357
  dt-bindings: mediatek: mt8186: add mt8186-mt6366-da7219-max98357
    document
  ASoC: mediatek: mt8186: add machine driver with mt6366, rt1019 and
    rt5682s
  dt-bindings: mediatek: mt8186: add mt8186-mt6366-rt1019-rt5682s
    document

 .../devicetree/bindings/sound/mt6358.txt      |    4 +-
 .../bindings/sound/mt8186-afe-pcm.yaml        |  175 +
 .../sound/mt8186-mt6366-da7219-max98357.yaml  |   75 +
 .../sound/mt8186-mt6366-rt1019-rt5682s.yaml   |   75 +
 sound/soc/mediatek/Kconfig                    |   44 +
 sound/soc/mediatek/Makefile                   |    1 +
 sound/soc/mediatek/mt8186/Makefile            |   22 +
 sound/soc/mediatek/mt8186/mt8186-afe-common.h |  235 ++
 .../soc/mediatek/mt8186/mt8186-afe-control.c  |  261 ++
 sound/soc/mediatek/mt8186/mt8186-afe-pcm.c    | 3009 +++++++++++++++++
 .../mediatek/mt8186/mt8186-mt6366-common.c    |   59 +
 .../mediatek/mt8186/mt8186-mt6366-common.h    |   17 +
 .../mt8186/mt8186-mt6366-da7219-max98357.c    | 1002 ++++++
 .../mt8186/mt8186-mt6366-rt1019-rt5682s.c     |  978 ++++++
 14 files changed, 5956 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/sound/mt8186-afe-pcm.yaml
 create mode 100644 Documentation/devicetree/bindings/sound/mt8186-mt6366-da7219-max98357.yaml
 create mode 100644 Documentation/devicetree/bindings/sound/mt8186-mt6366-rt1019-rt5682s.yaml
 create mode 100644 sound/soc/mediatek/mt8186/Makefile
 create mode 100644 sound/soc/mediatek/mt8186/mt8186-afe-common.h
 create mode 100644 sound/soc/mediatek/mt8186/mt8186-afe-control.c
 create mode 100644 sound/soc/mediatek/mt8186/mt8186-afe-pcm.c
 create mode 100644 sound/soc/mediatek/mt8186/mt8186-mt6366-common.c
 create mode 100644 sound/soc/mediatek/mt8186/mt8186-mt6366-common.h
 create mode 100644 sound/soc/mediatek/mt8186/mt8186-mt6366-da7219-max98357.c
 create mode 100644 sound/soc/mediatek/mt8186/mt8186-mt6366-rt1019-rt5682s.c

Comments

Mark Brown June 8, 2022, 11:24 a.m. UTC | #1
On Tue, Jun 07, 2022 at 10:20:40PM +0800, Jiaxin Yu wrote:

> +obj-$(CONFIG_SND_SOC_MT8186) += snd-soc-mt8186-afe.o
> +obj-$(CONFIG_SND_SOC_MT8186_MT6366_DA7219_MAX98357) += mt8186-mt6366-da7219-max98357.o
> +obj-$(CONFIG_SND_SOC_MT8186_MT6366_RT1019_RT5682S) += mt8186-mt6366-rt1019-rt5682s.o

This breaks bisection - these drivers are being added to the build here
but the relevant source files aren't added until later on in the series
so the commits in between won't build when the relevant Kconfig options
are selected.  The Makefile and Kconfig updates should be moved into the
driver patches.
Jiaxin Yu June 9, 2022, 2:58 a.m. UTC | #2
On Wed, 2022-06-08 at 12:24 +0100, Mark Brown wrote:
> On Tue, Jun 07, 2022 at 10:20:40PM +0800, Jiaxin Yu wrote:
> 
> > +obj-$(CONFIG_SND_SOC_MT8186) += snd-soc-mt8186-afe.o
> > +obj-$(CONFIG_SND_SOC_MT8186_MT6366_DA7219_MAX98357) += mt8186-
> > mt6366-da7219-max98357.o
> > +obj-$(CONFIG_SND_SOC_MT8186_MT6366_RT1019_RT5682S) += mt8186-
> > mt6366-rt1019-rt5682s.o
> 
> This breaks bisection - these drivers are being added to the build
> here
> but the relevant source files aren't added until later on in the
> series
> so the commits in between won't build when the relevant Kconfig
> options
> are selected.  The Makefile and Kconfig updates should be moved into
> the
> driver patches.

I see, this is to ensure the independence of each patch. I will move
the Kconfig and Makefile changes related to the machine driver to the
corresponding patch.

Thanks,
Jiaxin.Yu