mbox series

[v3,0/2] Add i2c clock duty cycle property for setting minimum persentage of clock high

Message ID 20220607163703.26355-1-potin.lai.pt@gmail.com (mailing list archive)
Headers show
Series Add i2c clock duty cycle property for setting minimum persentage of clock high | expand

Message

Potin Lai June 7, 2022, 4:37 p.m. UTC 
Introducing i2c-clk-duty-cycle-min property for setting minimum persentage
of clock high. 

This driver will go through base clock divisor and calculate a set of
high/low clock with duty cycle applied. if driver could not find a suit
high/low clock set, then it will use default duty cycle (50%) recalculate.

LINK: [v1] https://lore.kernel.org/all/20220530114056.8722-1-potin.lai.pt@gmail.com/
LINK: [v2] https://lore.kernel.org/all/20220601041512.21484-1-potin.lai.pt@gmail.com/

changes v2 --> v3:
* discard the properties for manual setting, use duty cycle to calculate
  high/low clock.

changes v1 --> v2:
* update bt-bindings documentation
* use meaningful values for properties instead of acture value in register

Potin Lai (2):
  aspeed: i2c: add clock duty cycle property
  dt-bindings: aspeed-i2c: add properties for setting i2c clock duty
    cycle

 .../devicetree/bindings/i2c/aspeed,i2c.yaml   |  8 +++
 drivers/i2c/busses/i2c-aspeed.c               | 56 +++++++++++++++----
 2 files changed, 53 insertions(+), 11 deletions(-)