mbox series

[0/3] arm64: dts: Add Innocom WB15-EVK support

Message ID 20220901112040.1471879-1-s.hauer@pengutronix.de (mailing list archive)
Headers show
Series arm64: dts: Add Innocom WB15-EVK support | expand

Message

Sascha Hauer Sept. 1, 2022, 11:20 a.m. UTC 
The Innocom WB15-EVK [1] board is a Eval base board for the WB15 SoM [2] which
is based on the NXP i.MX8MM. This series adds Innocom as a vendor prefix
and the necessary dts/dtsi files.

Sascha

[1] https://www.innocomm.com/product_inner.aspx?num=2233
[2] https://www.innocomm.com/product_inner.aspx?num=2232

Sascha Hauer (3):
  dt-bindings: vendor-prefixes: Add prefix for Innocom
  dt-bindings: arm: fsl: Add Innocom WB15 EVK
  arm64: dts: freescale: Add Innocom i.MX8MM based WB15 SoM and EVK

 .../devicetree/bindings/arm/fsl.yaml          |   1 +
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../dts/freescale/imx8mm-innocom-wb15-evk.dts | 147 ++++++
 .../dts/freescale/imx8mm-innocom-wb15.dtsi    | 480 ++++++++++++++++++
 5 files changed, 631 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-innocom-wb15-evk.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-innocom-wb15.dtsi