[0/2] pinctrl: pinctrl-zynqmp: Revert output-enable and bias-high-impedance support

Message

Potthuri, Sai Krishna Oct. 17, 2022, noon UTC

Having support for output-enable and bias-high-impedance properties
causing system hang with older Xilinx ZynqMP Platform Management Firmware
because there is missing autodetection feature.
When this feature is implemented, support for these two properties should
bring back.

Sai Krishna Potthuri (2):
  Revert "pinctrl: pinctrl-zynqmp: Add support for output-enable and
    bias-high-impedance"
  Revert "dt-bindings: pinctrl-zynqmp: Add output-enable configuration"

 .../devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml | 4 ----
 drivers/pinctrl/pinctrl-zynqmp.c                         | 9 ---------
 2 files changed, 13 deletions(-)

Comments

Michal Simek Oct. 17, 2022, 12:26 p.m. UTC | #1

On 10/17/22 14:00, Sai Krishna Potthuri wrote:
> Having support for output-enable and bias-high-impedance properties
> causing system hang with older Xilinx ZynqMP Platform Management Firmware
> because there is missing autodetection feature.
> When this feature is implemented, support for these two properties should
> bring back.
> 
> Sai Krishna Potthuri (2):
>    Revert "pinctrl: pinctrl-zynqmp: Add support for output-enable and
>      bias-high-impedance"
>    Revert "dt-bindings: pinctrl-zynqmp: Add output-enable configuration"
> 
>   .../devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml | 4 ----
>   drivers/pinctrl/pinctrl-zynqmp.c                         | 9 ---------
>   2 files changed, 13 deletions(-)
> 

You should CC stable to get it to stable kernels too.

Thanks,
Michal