mbox series

[v4,00/13] MediaTek pinctrl DT binding cleanup and MT6735 pinctrl support

Message ID 20221028153505.23741-1-y.oudjana@protonmail.com (mailing list archive)
Headers show
Series MediaTek pinctrl DT binding cleanup and MT6735 pinctrl support | expand

Message

Yassine Oudjana Oct. 28, 2022, 3:34 p.m. UTC
From: Yassine Oudjana <y.oudjana@protonmail.com>

This series adds a driver for the pin controller found on the MediaTek MT6735
and MT6735M SoCs. The two differ in the last 6 physical pins, which are used
for MSDC2 on MT6735 but don't exist on MT6735M (since MSDC2 doesn't exist on it
to begin with). In preparation to document DT bindings for this pin controller,
the existing documents for MT67xx SoCs are combined into one in order to
eliminate duplicate property definitions and standardize pin configuration node
names. Necessary cleanup is done along the way.

Changes since v3:
 - Improve interrupts description to make clear what sysirq means.
 - Set drive-strength constraints per variant.
 - Set maxItems for reg in MT6795.
 - Add blank lines between conditionals.
 - Add ref for both pinmux-node.yaml and pincfg-node.yaml.
 - Make pinctrl subnode-related changes in separate patch.
 - Fix up some pinctrl subnode property descriptions.
 - Add interrupts items descriptions to MT6765 and MT6735.
 
Changes since v2:
 - Add interrupt descriptions.
 - Change interrupts property item limits.
 - Move pinmux examples from node description to example dts.
 - Properly add myself as maintainer for MT6735 pinctrl driver and DT bindings
   document.
 - Remove tabs from a few defines in pinctrl-mt6735.c.

Changes since v1:
 - Combine other documents into existing mediatek,mt6779-pinctrl.yaml
   instead of creating a new document with wild card in its name.
 - Split first patch into smaller patches focused on specific changes.
 - Remove syscon compatible from MT6779 DT to avoid a check error.
 - Fix interrupt count for MT6795.

Yassine Oudjana (13):
  arm64: dts: mediatek: mt6779: Remove syscon compatible from pin
    controller
  dt-bindings: pinctrl: mediatek,mt6779-pinctrl: Improve description
  dt-bindings: pinctrl: mediatek,mt6779-pinctrl: Make gpio-ranges
    optional
  dt-bindings: pinctrl: mediatek,mt6779-pinctrl: Add MT6797
  dt-bindings: pinctrl: mediatek,pinctrl-mt6795: Fix interrupt count
  dt-bindings: pinctrl: mediatek,pinctrl-mt6795: Improve interrupts
    description
  dt-bindings: pinctrl: mediatek,mt6779-pinctrl: Pull pinctrl node
    changes from MT6795 document
  dt-bindings: pinctrl: mediatek,mt6779-pinctrl: Improve pinctrl subnode
    and property descriptions
  dt-bindings: pinctrl: mediatek,mt6779-pinctrl: Add MT6795
  arm64: dts: mediatek: mt6797: Make pin configuration nodes follow DT
    bindings
  dt-bindings: pinctrl: mediatek,mt6779-pinctrl: Document MT6765 pin
    controller
  dt-bindings: pinctrl: mediatek,mt6779-pinctrl: Document MT6735 pin
    controller
  pinctrl: mediatek: Add MT6735 pinctrl driver

 .../pinctrl/mediatek,mt6779-pinctrl.yaml      |  308 +-
 .../pinctrl/mediatek,mt6797-pinctrl.yaml      |  176 -
 .../pinctrl/mediatek,pinctrl-mt6795.yaml      |  224 -
 MAINTAINERS                                   |   10 +-
 arch/arm64/boot/dts/mediatek/mt6779.dtsi      |    2 +-
 arch/arm64/boot/dts/mediatek/mt6797.dtsi      |   20 +-
 drivers/pinctrl/mediatek/Kconfig              |    6 +
 drivers/pinctrl/mediatek/Makefile             |    1 +
 drivers/pinctrl/mediatek/pinctrl-mt6735.c     |  584 +++
 drivers/pinctrl/mediatek/pinctrl-mtk-mt6735.h | 3993 +++++++++++++++++
 10 files changed, 4866 insertions(+), 458 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/pinctrl/mediatek,mt6797-pinctrl.yaml
 delete mode 100644 Documentation/devicetree/bindings/pinctrl/mediatek,pinctrl-mt6795.yaml
 create mode 100644 drivers/pinctrl/mediatek/pinctrl-mt6735.c
 create mode 100644 drivers/pinctrl/mediatek/pinctrl-mtk-mt6735.h

Comments

Linus Walleij Nov. 8, 2022, 12:26 p.m. UTC | #1
Hi Yassine,

On Fri, Oct 28, 2022 at 5:35 PM Yassine Oudjana
<yassine.oudjana@gmail.com> wrote:

> This series adds a driver for the pin controller found on the MediaTek MT6735
> and MT6735M SoCs. The two differ in the last 6 physical pins, which are used
> for MSDC2 on MT6735 but don't exist on MT6735M (since MSDC2 doesn't exist on it
> to begin with). In preparation to document DT bindings for this pin controller,
> the existing documents for MT67xx SoCs are combined into one in order to
> eliminate duplicate property definitions and standardize pin configuration node
> names. Necessary cleanup is done along the way.
>
> Changes since v3:
>  - Improve interrupts description to make clear what sysirq means.
>  - Set drive-strength constraints per variant.
>  - Set maxItems for reg in MT6795.
>  - Add blank lines between conditionals.
>  - Add ref for both pinmux-node.yaml and pincfg-node.yaml.
>  - Make pinctrl subnode-related changes in separate patch.
>  - Fix up some pinctrl subnode property descriptions.
>  - Add interrupts items descriptions to MT6765 and MT6735.

I have applied patches 1-6 so you do not need to resend those.
Keep it going with the rest!

Yours,
Linus Walleij