[0/2] Add initial support for AM69 Starter Kit

Message

Dasnavis Sabiya Jan. 19, 2023, 1:29 p.m. UTC

From: Dasnavis Sabiya <[e-mail]>

AM69 Starter Kit is a single board designed based on TI's AM69 SOC
providing advanced system integration in automotive ADAS applications,
autonomous mobile robot and edge AI applications. The SOC comprises
of Cortex-A72s in dual clusters, lockstep capable dual Cortex-R5F MCUs,
Vision Processing Accelerators (VPAC) with Image Signal Processor (ISP)
and multiple vision assist accelerators, Depth and Motion Processing
Accelerators (DMPAC), Deep-learning Matrix Multiply Accelerator(MMA)
and C7x floating point vector DSP

Refer below link to AM69 Technical Reference Manual for further details:
https://www.ti.com/lit/zip/spruj52

AM69 SK supports the following interfaces:
       * 32 GB LPDDR4 RAM
       * x1 Gigabit Ethernet interface
       * x3 USB 3.0 Type-A ports
       * x1 USB 3.0 Type-C port
       * x1 UHS-1 capable micro-SD card slot
       * x4 MCAN instances
       * 32 GB eMMC Flash
       * 512 Mbit OSPI flash
       * x2 Display connectors
       * x1 PCIe M.2 M Key
       * x1 PCIe M.2 E Key
       * x1 4L PCIe Card Slot
       * x3 CSI2 Camera interface
       * 40-pin Raspberry Pi header

This patch series add initial support for AM69 Starter Kit.

Design Files can be referred from https://www.ti.com/lit/zip/SPRR466

bootlog: https://rentry.co/coyvw/raw

Dasnavis Sabiya (2):
  dt-bindings: arm: ti: Add binding for AM69 Starter Kit
  arch: arm64: dts: Add support for AM69 Starter Kit

 .../devicetree/bindings/arm/ti/k3.yaml        |   1 +
 arch/arm64/boot/dts/ti/Makefile               |   1 +
 arch/arm64/boot/dts/ti/k3-am69-sk.dts         | 180 ++++++++++++++++++
 3 files changed, 182 insertions(+)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am69-sk.dts