mbox series

[v2,0/6] add VTM nodes to TI's K3 SoCs

Message ID 20230120003051.9100-1-bb@ti.com (mailing list archive)
Headers show
Series add VTM nodes to TI's K3 SoCs | expand

Message

Bryan Brattlof Jan. 20, 2023, 12:30 a.m. UTC 
Hello again everyone!

This patch series adds in basic VTM nodes for all of TI's K3 SoCs. As of
right now these do not do much other than add thermal entries into the
sysfs directory and power down the device once it's exceeded a critical
temperature.

Changes from v1:
- Fixed indexing of thermal nodes[0]

[0] https://lore.kernel.org/all/20230119221322.12563-1-bb@ti.com/

Thanks for reviewing!
~Bryan

Bryan Brattlof (6):
  arm64: dts: ti: k3-am64-main: add VTM node
  arm64: dts: ti: k3-am62-wakeup: add VTM node
  arm64: dts: ti: k3-j721e-mcu-wakeup: add VTM node
  arm64: dts: ti: k3-j721s2-mcu-wakeup: add VTM node
  arm64: dts: ti: k3-j7200-mcu-wakeup: add VTM node
  arm64: dts: ti: k3-am62a-wakeup: add VTM node

 arch/arm64/boot/dts/ti/k3-am62-thermal.dtsi   |  33 ++++++
 arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi    |   8 ++
 arch/arm64/boot/dts/ti/k3-am62.dtsi           |   6 +-
 arch/arm64/boot/dts/ti/k3-am62a-thermal.dtsi  |  47 ++++++++
 arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi   |   8 ++
 arch/arm64/boot/dts/ti/k3-am62a.dtsi          |   2 +
 arch/arm64/boot/dts/ti/k3-am64-main.dtsi      |   8 ++
 arch/arm64/boot/dts/ti/k3-am64-thermal.dtsi   |  33 ++++++
 arch/arm64/boot/dts/ti/k3-am64.dtsi           |   3 +
 .../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi      |   8 ++
 arch/arm64/boot/dts/ti/k3-j7200-thermal.dtsi  |  47 ++++++++
 arch/arm64/boot/dts/ti/k3-j7200.dtsi          |   2 +
 .../boot/dts/ti/k3-j721e-mcu-wakeup.dtsi      |   9 ++
 arch/arm64/boot/dts/ti/k3-j721e-thermal.dtsi  |  75 +++++++++++++
 arch/arm64/boot/dts/ti/k3-j721e.dtsi          |   2 +
 .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi     |   8 ++
 arch/arm64/boot/dts/ti/k3-j721s2-thermal.dtsi | 103 ++++++++++++++++++
 arch/arm64/boot/dts/ti/k3-j721s2.dtsi         |   2 +
 18 files changed, 403 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am62-thermal.dtsi
 create mode 100644 arch/arm64/boot/dts/ti/k3-am62a-thermal.dtsi
 create mode 100644 arch/arm64/boot/dts/ti/k3-am64-thermal.dtsi
 create mode 100644 arch/arm64/boot/dts/ti/k3-j7200-thermal.dtsi
 create mode 100644 arch/arm64/boot/dts/ti/k3-j721e-thermal.dtsi
 create mode 100644 arch/arm64/boot/dts/ti/k3-j721s2-thermal.dtsi


base-commit: 1b929c02afd37871d5afb9d498426f83432e71c2

Comments

Vignesh Raghavendra June 15, 2023, 10:22 a.m. UTC | #1 
Hi Bryan Brattlof,

On Thu, 19 Jan 2023 18:30:45 -0600, Bryan Brattlof wrote:
> This patch series adds in basic VTM nodes for all of TI's K3 SoCs. As of
> right now these do not do much other than add thermal entries into the
> sysfs directory and power down the device once it's exceeded a critical
> temperature.
> 
> Changes from v1:
> - Fixed indexing of thermal nodes[0]
> 
> [...]

I have applied the following to branch ti-k3-dts-next on [1].
Thank you!

[1/6] arm64: dts: ti: k3-am64-main: add VTM node
      commit: 96135297a76003faae68e3aa86e2e19851510eb9
[2/6] arm64: dts: ti: k3-am62-wakeup: add VTM node
      commit: bbb6dc62505acf6fcb80573f7e7a59875c33be0d
[3/6] arm64: dts: ti: k3-j721e-mcu-wakeup: add VTM node
      commit: 8fb4e87c55979c1f6691346205b884d1863ca6db
[4/6] arm64: dts: ti: k3-j721s2-mcu-wakeup: add VTM node
      commit: d148e3fe52c855b1709ed031eff6e63e87ad0372
[5/6] arm64: dts: ti: k3-j7200-mcu-wakeup: add VTM node
      commit: 4aa6586a9720849527379c415d0977f0d5bcfcac
[6/6] arm64: dts: ti: k3-am62a-wakeup: add VTM node
      commit: 225312fbaf37bb283dbc92a0a1d4dfe58629ab64

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent up the chain during
the next merge window (or sooner if it is a relevant bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
--
Vignesh