mbox series

[v3,0/2] media: i2c: add imx415 cmos image sensor driver

Message ID 20230130084710.297004-1-michael.riesch@wolfvision.net (mailing list archive)
Headers show
Series media: i2c: add imx415 cmos image sensor driver | expand


Michael Riesch Jan. 30, 2023, 8:47 a.m. UTC
Hi all,

This series adds a driver for the Sony IMX415 CMOS image sensor.
The Sony IMX415 is a diagonal 6.4 mm (Type 1/2.8) CMOS active pixel type
solid-state image sensor with a square pixel array and 8.46 M effective
pixels. This chip operates with analog 2.9 V, digital 1.1 V, and interface
1.8 V triple power supply, and has low power consumption.
The IMX415 is programmable through I2C interface. The sensor output is
available via CSI-2 serial data output (two or four lanes).

Version 2 of this series fixes the port description in the devicetree
binding as pointed out by Rob Herring.

Version 3 addresses the comments by Sakari Ailus, Marco Felsch and Rob

Looking forward to your comments!

Best regards,

Gerald Loacker (1):
  media: i2c: add imx415 cmos image sensor driver

Michael Riesch (1):
  dt-bindings: media: i2c: add imx415 cmos image sensor

 .../bindings/media/i2c/sony,imx415.yaml       |  122 ++
 MAINTAINERS                                   |    8 +
 drivers/media/i2c/Kconfig                     |   14 +
 drivers/media/i2c/Makefile                    |    1 +
 drivers/media/i2c/imx415.c                    | 1300 +++++++++++++++++
 5 files changed, 1445 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/sony,imx415.yaml
 create mode 100644 drivers/media/i2c/imx415.c

base-commit: 1b929c02afd37871d5afb9d498426f83432e71c2