mbox series

[v7,0/6] arm64: ti: Enable audio on AM62 and AM62A

Message ID 20230313-mcasp_upstream-v7-0-4fac9c785299@ti.com (mailing list archive)
Headers show
Series arm64: ti: Enable audio on AM62 and AM62A | expand

Message

Jai Luthra March 24, 2023, 8:49 a.m. UTC 
This patch series adds support for audio via headphone jack on SK-AM62
(E2+) and SK-AM62A boards. The jack is wired to TLV320AIC3106 (codec),
which is connected to McASP1 (serializer) on the SoC.

The TRRS 3.5mm jack can be used for simultaneous playback and recording.

Signed-off-by: Jai Luthra <j-luthra@ti.com>
---
Changes in v7:
- Add links to schematics in commit messages
- Link to v6: https://lore.kernel.org/r/20230313-mcasp_upstream-v6-0-77685d7cbeb8@ti.com

Changes in v6:
- Use generic node names (audio-controller@) for McASP
- Fix labels, indentation and spacing issues
- For SK-AM62A:
	- Remove redundant status property from codec
	- Add a note in commit message about missing DVDD regulator
	- Supply OCMV level manually to the codec
- Link to v5: https://lore.kernel.org/r/20230313-mcasp_upstream-v5-0-d6844707aa8a@ti.com

---
Jai Luthra (5):
      arm64: defconfig: Enable audio drivers for TI K3 SoCs
      arm64: dts: ti: k3-am625-sk: Enable audio on AM62 SK
      arm64: dts: ti: k3-am62a-main: Add nodes for McASP
      arm64: dts: ti: k3-am62a7-sk: Split vcc_3v3 regulators
      arm64: dts: ti: k3-am62a7-sk: Enable audio on AM62A

Jayesh Choudhary (1):
      arm64: dts: ti: k3-am62-main: Add McASP nodes

 arch/arm64/boot/dts/ti/k3-am62-main.dtsi  | 60 ++++++++++++++++++++
 arch/arm64/boot/dts/ti/k3-am625-sk.dts    | 88 +++++++++++++++++++++++++++++
 arch/arm64/boot/dts/ti/k3-am62a-main.dtsi | 60 ++++++++++++++++++++
 arch/arm64/boot/dts/ti/k3-am62a7-sk.dts   | 92 ++++++++++++++++++++++++++++++-
 arch/arm64/configs/defconfig              |  2 +
 5 files changed, 300 insertions(+), 2 deletions(-)
---
base-commit: e5dbf24e8b9e6aa0a185d86ce46a7a9c79ebb40f
change-id: 20230313-mcasp_upstream-0e137013059b

Best regards,