mbox series

[RFC,0/2] Add MAIN CPSW2G DT support for J721S2

Message ID 20230426105718.118806-1-s-vadapalli@ti.com (mailing list archive)
Headers show
Series Add MAIN CPSW2G DT support for J721S2 | expand

Message

Siddharth Vadapalli April 26, 2023, 10:57 a.m. UTC 
Hello,

This series adds devicetree node for MAIN CPSW2G instance of CPSW
Ethernet Switch on TI's J721S2 SoC. Also, a devicetree overlay is added
in order to enable MAIN CPSW2G in RGMII-RXID mode using the GESI
Expansion Board connected to the J7 Common-Processor-Board.

This series applies on top of the following series:
https://lore.kernel.org/r/20230331090028.8373-1-r-gunasekaran@ti.com/

Regards,
Siddharth.

---

Kishon Vijay Abraham I (2):
  arm64: dts: ti: k3-j721s2-main: Add main CPSW2G devicetree node
  arm64: dts: ti: k3-j721s2: Add overlay to enable main CPSW2G with GESI

 arch/arm64/boot/dts/ti/Makefile               |  2 +
 .../dts/ti/k3-j721s2-evm-gesi-exp-board.dtso  | 83 +++++++++++++++++++
 arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi    | 69 +++++++++++++++
 3 files changed, 154 insertions(+)
 create mode 100644 arch/arm64/boot/dts/ti/k3-j721s2-evm-gesi-exp-board.dtso