mbox series

[0/2] Add MAIN CPSW2G DT support for J721S2

Message ID 20230529104913.560045-1-s-vadapalli@ti.com (mailing list archive)
Headers show
Series Add MAIN CPSW2G DT support for J721S2 | expand

Message

s-vadapalli May 29, 2023, 10:49 a.m. UTC 
Hello,

This series adds devicetree node for MAIN CPSW2G instance of CPSW
Ethernet Switch on TI's J721S2 SoC. Also, a devicetree overlay is added
in order to enable MAIN CPSW2G in RGMII-RXID mode using the GESI
Expansion Board connected to the J7 Common-Processor-Board.

NOTE: This series applies on top of the following series:
https://lore.kernel.org/r/20230331090028.8373-1-r-gunasekaran@ti.com/
which in turn has been applied on linux-next tagged next-20230525.

Regards,
Siddharth.

---

RFC series at:
https://lore.kernel.org/r/20230426105718.118806-1-s-vadapalli@ti.com

Changes since RFC series:
- Add GESI board product link in the device-tree overlay file.

Kishon Vijay Abraham I (2):
  arm64: dts: ti: k3-j721s2-main: Add main CPSW2G devicetree node
  arm64: dts: ti: k3-j721s2: Add overlay to enable main CPSW2G with GESI

 arch/arm64/boot/dts/ti/Makefile               |  2 +
 .../dts/ti/k3-j721s2-evm-gesi-exp-board.dtso  | 85 +++++++++++++++++++
 arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi    | 69 +++++++++++++++
 3 files changed, 156 insertions(+)
 create mode 100644 arch/arm64/boot/dts/ti/k3-j721s2-evm-gesi-exp-board.dtso