[v3,0/3] Add support for Allwinner GPADC on D1/T113s/R329/T507 SoCs

Message

Maksim Kiselev June 4, 2023, 6:53 p.m. UTC

This series adds support for general purpose ADC (GPADC) on new
Allwinner's SoCs, such as D1, T113s, T507 and R329. The implemented driver
provides basic functionality for getting ADC channels data.

Change History:
v3:
- Added DT bindings dual license, fixed property order and example formatting
- Added explanations comments for timeout and mutex
- Dropped unnecessary regmap and used readl/writel instead
- Added error message about getting channel number
- Renamed labels and variables to make them self-explanatory

v2:
- Added lastch flag to avoid addition work for already selected channel
- Added reset assertion on module remove
- Added dynamic channel allocation and dropped iio_chan_spec arrays
- Changed IIO_CHAN_INFO_SCALE type to FRACTIONAL_LOG2
- Dropped separate compatible strings and configs for T113s and R329
- Fixed includes
- Fixed Kconfig description
- Removed duplicate probe error messages
- Used FIELD_PREP for bit setup

v1:
- Initial version


Maxim Kiselev (3):
  iio: adc: Add Allwinner D1/T113s/R329/T507 SoCs GPADC
  dt-bindings: iio: adc: Add Allwinner D1/T113s/R329/T507 SoCs GPADC
  riscv: dts: allwinner: d1: Add GPADC node

 .../iio/adc/allwinner,sun20i-d1-gpadc.yaml    |  90 ++++++
 .../boot/dts/allwinner/sunxi-d1s-t113.dtsi    |  10 +
 drivers/iio/adc/Kconfig                       |  10 +
 drivers/iio/adc/Makefile                      |   1 +
 drivers/iio/adc/sun20i-gpadc-iio.c            | 296 ++++++++++++++++++
 5 files changed, 407 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/adc/allwinner,sun20i-d1-gpadc.yaml
 create mode 100644 drivers/iio/adc/sun20i-gpadc-iio.c

Comments

Rob Herring June 4, 2023, 7:29 p.m. UTC | #1

On Sun, 04 Jun 2023 21:53:15 +0300, Maksim Kiselev wrote:
> From: Maxim Kiselev <[e-mail]>
> 
> Allwinner's D1/T113s/R329/T507 SoCs have a new general purpose ADC.
> This ADC is the same for all of this SoCs. The only difference is
> the number of available channels.
> 
> Signed-off-by: Maxim Kiselev <[e-mail]>
> ---
>  .../iio/adc/allwinner,sun20i-d1-gpadc.yaml    | 90 +++++++++++++++++++
>  1 file changed, 90 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/adc/allwinner,sun20i-d1-gpadc.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/adc/allwinner,sun20i-d1-gpadc.yaml: 'maintainers' is a required property
	hint: Metaschema for devicetree binding documentation
	from schema $id: http://devicetree.org/meta-schemas/base.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/adc/allwinner,sun20i-d1-gpadc.example.dtb: adc@2009000: interrupts: [[73], [4]] is too long
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/adc/allwinner,sun20i-d1-gpadc.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/[e-mail]

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.