mbox series

[0/3] arm64: dts: freescale: Add support for LX2162 SoM & Clearfog Board

Message ID 20230616110610.32173-1-josua@solid-run.com (mailing list archive)
Headers show
Series arm64: dts: freescale: Add support for LX2162 SoM & Clearfog Board | expand

Message

Josua Mayer June 16, 2023, 11:06 a.m. UTC 
Add support for the SolidRun LX2162A System on Module (SoM), and the
Clearfog evaluation board.

This patch-set introduces:
- dt node for lx2160a serdes block #2
- dtsi for lx2162a system on module
- dts for lx2162 clearfog

Firstly Please note that checkpatch was complaining about the EEPROMS:
- DT compatible string "st,24c02" appears un-documented
- DT compatible string "st,24c2048" appears un-documented
- DT compatible string "atmel,24c2048" appears un-documented
However to my eyes these *are* already documented in at24.yaml,
and are also used in existing device-tree.

Secondly the MAINTAINERS file has not been modified.
Is it required I add myself or *someone* for these new dts?

Josua Mayer (3):
  arm64: dts: lx2160a: describe the SerDes block #2
  dt-bindings: arm: Add SolidRun LX2162A SoM & Clearfog Board
  arm64: dts: freescale: Add support for LX2162 SoM & Clearfog Board

 .../devicetree/bindings/arm/fsl.yaml          |   2 +
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../arm64/boot/dts/freescale/fsl-lx2160a.dtsi |   6 +
 .../dts/freescale/fsl-lx2162a-clearfog.dts    | 369 ++++++++++++++++++
 .../dts/freescale/fsl-lx2162a-sr-som.dtsi     |  78 ++++
 5 files changed, 456 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/fsl-lx2162a-clearfog.dts
 create mode 100644 arch/arm64/boot/dts/freescale/fsl-lx2162a-sr-som.dtsi

Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Li Yang <leoyang.li@nxp.com>