mbox series

[RFC,0/7] Add virtio_rtc module and related changes

Message ID 20230630171052.985577-1-peter.hilber@opensynergy.com (mailing list archive)
Headers show
Series Add virtio_rtc module and related changes | expand

Message

Peter Hilber June 30, 2023, 5:10 p.m. UTC 
This patch series adds the virtio_rtc module, and related bugfixes and
small interface extensions. The virtio_rtc module implements a driver
compatible with the proposed Virtio RTC device specification [1]. The
Virtio RTC (Real Time Clock) device provides information about current
time. The device can provide different clocks, e.g. for the UTC or TAI time
standards, or for physical time elapsed since some past epoch. The driver
can read the clocks with simple or more accurate methods.

This patch series depends, through its arm_arch_timer patch, on patch
"arm64/arch_timer: Provide noinstr sched_clock_read() functions" [3] which
seems not to be available with all development branches yet. Pull [2] for
an equivalent series on top of mst/linux-next, which should apply without
the above patch. Pull [5] for an equivalent series on top of
tip/timers/core. Pull [6] for an equivalent series on top of
tip/sched/core.

The series first fixes some bugs in the get_device_system_crosststamp()
interpolation code, which is required for reliable virtio_rtc operation.
Next, expose some Arm Generic Timer clocksource details for virtio_rtc.
Last, add the virtio_rtc implementation.

For the Virtio RTC device, there is currently a proprietary implementation,
which has been used for provisional testing.

virtio_rtc exposes clocks as PTP clocks to userspace, similar to ptp_kvm.
If both the Virtio RTC device and this driver have special support for the
current clocksource, time synchronization programs can use
cross-timestamping using ioctl PTP_SYS_OFFSET_PRECISE2 aka
PTP_SYS_OFFSET_PRECISE. Similar to ptp_kvm, system time synchronization
with single-digit ns precision is possible with a quiescent reference clock
(from the Virtio RTC device). This works even when the Virtio device
response is slow compared to ptp_kvm hypercalls.

The following illustrates a test using PTP_SYS_OFFSET_PRECISE, with
interspersed strace log and chrony [4] refclocks log, on arm64. In the
example, chrony tracks a virtio_rtc PTP clock ("PHCV", /dev/ptp0). The raw
offset between the virtio_rtc clock and CLOCK_REALTIME is 0 to 1 ns. At the
device side, the Virtio RTC device artificially delays both the clock read
request, and the response, by 50 ms. Cross-timestamp interpolation still
works with this delay. chrony also monitors a ptp_kvm clock ("PHCK",
/dev/ptp3) for comparison, which yields a similar offset.

	ioctl(5</dev/ptp3>, PTP_SYS_OFFSET_PRECISE, 0xffffe86691c8) = 0 <0.000329>
	===============================================================================
	   Date (UTC) Time         Refid  DP L P  Raw offset   Cooked offset      Disp.
	===============================================================================
	2023-06-29 18:49:55.595742 PHCK    0 N 0  1.000000e-09  8.717931e-10  5.500e-08
	2023-06-29 18:49:55.595742 PHCK    - N -       -        8.717931e-10  5.500e-08
	ioctl(6</dev/ptp0>, PTP_SYS_OFFSET_PRECISE, 0xffffe86691c8) = 0 <0.101545>
	2023-06-29 18:49:56.147766 PHCV    0 N 0  1.000000e-09  8.801870e-10  5.500e-08
	2023-06-29 18:49:56.147766 PHCV    - N -       -        8.801870e-10  5.500e-08
	ioctl(5</dev/ptp3>, PTP_SYS_OFFSET_PRECISE, 0xffffe86691c8) = 0 <0.000195>
	2023-06-29 18:49:56.202446 PHCK    0 N 0  1.000000e-09  7.364180e-10  5.500e-08
	2023-06-29 18:49:56.202446 PHCK    - N -       -        7.364180e-10  5.500e-08
	ioctl(6</dev/ptp0>, PTP_SYS_OFFSET_PRECISE, 0xffffe86691c8) = 0 <0.101484>
	2023-06-29 18:49:56.754641 PHCV    0 N 0  0.000000e+00 -2.617368e-10  5.500e-08
	2023-06-29 18:49:56.754641 PHCV    - N -       -       -2.617368e-10  5.500e-08
	ioctl(5</dev/ptp3>, PTP_SYS_OFFSET_PRECISE, 0xffffe86691c8) = 0 <0.000270>
	2023-06-29 18:49:56.809282 PHCK    0 N 0  1.000000e-09  7.779321e-10  5.500e-08
	2023-06-29 18:49:56.809282 PHCK    - N -       -        7.779321e-10  5.500e-08
	ioctl(6</dev/ptp0>, PTP_SYS_OFFSET_PRECISE, 0xffffe86691c8) = 0 <0.101510>
	2023-06-29 18:49:57.361376 PHCV    0 N 0  0.000000e+00 -2.198794e-10  5.500e-08
	2023-06-29 18:49:57.361376 PHCV    - N -       -       -2.198794e-10  5.500e-08

This patch series only adds special support for the Arm Generic Timer
clocksource. At the driver side, it should be easy to support more
clocksources.

Without special support for the current clocksource, time synchronization
programs can still use ioctl PTP_SYS_OFFSET_EXTENDED2 aka
PTP_SYS_OFFSET_EXTENDED. In this case, precision will generally be worse
and will depend on the Virtio device response characteristics.

The following illustrates a test using PTP_SYS_OFFSET_EXTENDED, with
interspersed strace log and chrony refclocks log, on x86-64 (with `ts'
values omitted):

	ioctl(5, PTP_SYS_OFFSET_EXTENDED, {n_samples=10, ts=OMITTED}) = 0
	===============================================================================
	   Date (UTC) Time         Refid  DP L P  Raw offset   Cooked offset      Disp.
	===============================================================================
	2023-06-28 14:11:26.697782 PHCV    0 N 0  3.318200e-05  3.450891e-05  4.611e-06
	2023-06-28 14:11:26.697782 PHCV    - N -       -        3.450891e-05  4.611e-06
	ioctl(5, PTP_SYS_OFFSET_EXTENDED, {n_samples=10, ts=OMITTED}) = 0
	2023-06-28 14:11:27.208763 PHCV    0 N 0 -3.792800e-05 -4.023965e-05  4.611e-06
	2023-06-28 14:11:27.208763 PHCV    - N -       -       -4.023965e-05  4.611e-06
	ioctl(5, PTP_SYS_OFFSET_EXTENDED, {n_samples=10, ts=OMITTED}) = 0
	2023-06-28 14:11:27.722818 PHCV    0 N 0 -3.328600e-05 -3.134404e-05  4.611e-06
	2023-06-28 14:11:27.722818 PHCV    - N -       -       -3.134404e-05  4.611e-06
	ioctl(5, PTP_SYS_OFFSET_EXTENDED, {n_samples=10, ts=OMITTED}) = 0
	2023-06-28 14:11:28.233572 PHCV    0 N 0 -4.966900e-05 -4.584331e-05  4.611e-06
	2023-06-28 14:11:28.233572 PHCV    - N -       -       -4.584331e-05  4.611e-06
	ioctl(5, PTP_SYS_OFFSET_EXTENDED, {n_samples=10, ts=OMITTED}) = 0
	2023-06-28 14:11:28.742737 PHCV    0 N 0  4.902700e-05  5.361388e-05  4.611e-06
	2023-06-28 14:11:28.742737 PHCV    - N -       -        5.361388e-05  4.611e-06

The following udev rule can be used to get a symlink /dev/ptp_virtio to the
UTC clock:

	SUBSYSTEM=="ptp", ATTR{clock_name}=="Virtio PTP UTC", SYMLINK += "ptp_virtio"

The following chrony configuration directive can then be added in
/etc/chrony/chrony.conf to synchronize to the Virtio UTC clock:

	refclock PHC /dev/ptp_virtio refid PHCV poll -1 dpoll -1

This patch series adds virtio_rtc not in drivers/ptp, but as a generic
Virtio driver. In the near future, virtio_rtc should be extended with an
RTC Class driver, along with extensions to the Virtio RTC device draft spec
to support RTC alarms.

Feedback is greatly appreciated.

[1] https://lists.oasis-open.org/archives/virtio-comment/202306/msg00592.html
[2] https://github.com/OpenSynergy/linux virtio-rtc-v1-on-mst-vhost-linux-next
[3] https://lore.kernel.org/r/20230519102715.435618812@infradead.org
[4] https://chrony.tuxfamily.org/
[5] https://github.com/OpenSynergy/linux virtio-rtc-v1-on-tip-timers-core
[6] https://github.com/OpenSynergy/linux virtio-rtc-v1-on-tip-sched-core


Peter Hilber (7):
  timekeeping: Fix cross-timestamp interpolation on counter wrap
  timekeeping: Fix cross-timestamp interpolation corner case decision
  timekeeping: Fix cross-timestamp interpolation for non-x86
  clocksource: arm_arch_timer: Export counter type, clocksource
  virtio_rtc: Add module and driver core
  virtio_rtc: Add PTP clocks
  virtio_rtc: Add Arm Generic Timer cross-timestamping

 MAINTAINERS                          |   7 +
 drivers/clocksource/arm_arch_timer.c |  16 +
 drivers/virtio/Kconfig               |  43 ++
 drivers/virtio/Makefile              |   4 +
 drivers/virtio/virtio_rtc_arm.c      |  44 ++
 drivers/virtio/virtio_rtc_driver.c   | 841 +++++++++++++++++++++++++++
 drivers/virtio/virtio_rtc_internal.h |  85 +++
 drivers/virtio/virtio_rtc_ptp.c      | 384 ++++++++++++
 include/clocksource/arm_arch_timer.h |  19 +
 include/uapi/linux/virtio_rtc.h      | 159 +++++
 kernel/time/timekeeping.c            |  20 +-
 11 files changed, 1615 insertions(+), 7 deletions(-)
 create mode 100644 drivers/virtio/virtio_rtc_arm.c
 create mode 100644 drivers/virtio/virtio_rtc_driver.c
 create mode 100644 drivers/virtio/virtio_rtc_internal.h
 create mode 100644 drivers/virtio/virtio_rtc_ptp.c
 create mode 100644 include/uapi/linux/virtio_rtc.h


base-commit: 6352a698ca5bf26a9199202666b16cf741f579f6