[v3,00/15] arm64: qcom: add and enable SHM Bridge support

Message

Bartosz Golaszewski Oct. 9, 2023, 3:34 p.m. UTC

From: Bartosz Golaszewski <[e-mail]>

This is pretty much another full rewrite of the SHM Bridge support
series. After more on- and off-list discussions I think this time it
will be close to the final thing though.

We've established the need for using separate pools for SCM and QSEECOM
as well as the upcoming scminvoke driver.

It's also become clear that in order to be future-proof, the new
allocator must be an abstraction layer of a higher level as the SHM
Bridge will not be the only memory protection mechanism that we'll see
upstream. Hence the rename to TrustZone Memory rather than SCM Memory
allocator.

Also to that end: the new allocator is its own module now and provides a
Kconfig choice menu for selecting the mode of operation (currently
default and SHM Bridge).

Due to a high divergence from v2, I dropped all tags except for
patch 1/15 which didn't change.

Tested on sm8550 and sa8775p with the Inline Crypto Engine and
remoteproc.

v2 -> v3:
- restore pool management and use separate pools for different users
- don't use the new allocator in qcom_scm_pas_init_image() as the
  TrustZone will create an SHM bridge for us here
- rewrite the entire series again for most part

v1 -> v2:
- too many changes to list, it's a complete rewrite as explained above

Bartosz Golaszewski (15):
  firmware: qcom: move Qualcomm code into its own directory
  firmware: qcom: scm: add a missing forward declaration for struct
    device
  firmware: qcom: scm: remove unneeded 'extern' specifiers
  firmware: qcom: add a dedicated TrustZone buffer allocator
  firmware: qcom: scm: enable the TZ mem allocator
  firmware: qcom: scm: smc: switch to using the SCM allocator
  firmware: qcom: scm: make qcom_scm_assign_mem() use the TZ allocator
  firmware: qcom: scm: make qcom_scm_ice_set_key() use the TZ allocator
  firmware: qcom: scm: make qcom_scm_lmh_dcvsh() use the TZ allocator
  firmware: qcom: scm: make qcom_scm_qseecom_app_get_id() use the TZ
    allocator
  firmware: qcom: qseecom: convert to using the TZ allocator
  firmware: qcom: scm: add support for SHM bridge operations
  firmware: qcom: tzmem: enable SHM Bridge support
  firmware: qcom: scm: clarify the comment in qcom_scm_pas_init_image()
  arm64: defconfig: enable SHM Bridge support for the TZ memory
    allocator

 MAINTAINERS                                   |   4 +-
 arch/arm64/configs/defconfig                  |   1 +
 drivers/firmware/Kconfig                      |  48 +--
 drivers/firmware/Makefile                     |   5 +-
 drivers/firmware/qcom/Kconfig                 |  86 ++++
 drivers/firmware/qcom/Makefile                |  10 +
 drivers/firmware/{ => qcom}/qcom_qseecom.c    |   0
 .../{ => qcom}/qcom_qseecom_uefisecapp.c      | 260 +++++--------
 drivers/firmware/{ => qcom}/qcom_scm-legacy.c |   0
 drivers/firmware/{ => qcom}/qcom_scm-smc.c    |  28 +-
 drivers/firmware/{ => qcom}/qcom_scm.c        | 179 +++++----
 drivers/firmware/{ => qcom}/qcom_scm.h        |  21 +-
 drivers/firmware/qcom/qcom_tzmem.c            | 366 ++++++++++++++++++
 drivers/firmware/qcom/qcom_tzmem.h            |  13 +
 include/linux/firmware/qcom/qcom_qseecom.h    |   4 +-
 include/linux/firmware/qcom/qcom_scm.h        |   6 +
 include/linux/firmware/qcom/qcom_tzmem.h      |  28 ++
 17 files changed, 746 insertions(+), 313 deletions(-)
 create mode 100644 drivers/firmware/qcom/Kconfig
 create mode 100644 drivers/firmware/qcom/Makefile
 rename drivers/firmware/{ => qcom}/qcom_qseecom.c (100%)
 rename drivers/firmware/{ => qcom}/qcom_qseecom_uefisecapp.c (84%)
 rename drivers/firmware/{ => qcom}/qcom_scm-legacy.c (100%)
 rename drivers/firmware/{ => qcom}/qcom_scm-smc.c (91%)
 rename drivers/firmware/{ => qcom}/qcom_scm.c (93%)
 rename drivers/firmware/{ => qcom}/qcom_scm.h (88%)
 create mode 100644 drivers/firmware/qcom/qcom_tzmem.c
 create mode 100644 drivers/firmware/qcom/qcom_tzmem.h
 create mode 100644 include/linux/firmware/qcom/qcom_tzmem.h