mbox series

[v4,0/3] Add phyBOARD-Segin-i.MX93 support

Message ID 20240122095306.14084-1-othacehe@gnu.org (mailing list archive)
Headers show
Series Add phyBOARD-Segin-i.MX93 support | expand

Message

Mathieu Othacehe Jan. 22, 2024, 9:53 a.m. UTC 
Hello,

This adds support for the phyBOARD-Segin-i.MX93 board.

Note that the v4 enables the FEC ethernet port to ease device-tree
debugging, as well as the heartbeat LED and the gpio-line-names for the
GPIOs on the phyBOARD X16 header.

It also adds a new documentation patch to fix a dt check warning regarding
gpio-line-names property.

Thanks,

Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
---
Changes in v4:
- Add gpio-line-names to gpio-vf610 dt-bindings documentation
- Add the heartbeat SoM LED
- Add support for the FEC ethernet port
- Restore the original authors in the copyright
- Add gpio-line-names for the GPIOs on the X16 header
Changes in v3:
- Update documentation to match PHYTEC naming
- Remove useless properties
- Update pinmux from PHYTEC downstream kernel
Changes in v2: 
- Remove useless line
- Add missing reserved-memory entries

v3: https://lore.kernel.org/linux-devicetree/20240119092835.21462-1-othacehe@gnu.org/

Mathieu Othacehe (3):
  dt-bindings: arm: fsl: Add phyBOARD-Segin-i.MX93
  dt-bindings: gpio: gpio-vf610: add gpio-line-names
  arm64: dts: imx93: Add phyBOARD-Segin-i.MX93 support

 .../devicetree/bindings/arm/fsl.yaml          |   6 +
 .../devicetree/bindings/gpio/gpio-vf610.yaml  |   1 +
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../dts/freescale/imx93-phyboard-segin.dts    | 141 ++++++++++++++++++
 .../boot/dts/freescale/imx93-phycore-som.dtsi | 127 ++++++++++++++++
 5 files changed, 276 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi