mbox series

[0/5] i.MX8M add DSI output endpoint

Message ID 20240301091413.3050689-1-alexander.stein@ew.tq-group.com (mailing list archive)
Headers show
Series i.MX8M add DSI output endpoint | expand

Message

Alexander Stein March 1, 2024, 9:14 a.m. UTC 
Hi,

this series was initially triggered by dtbs_check warnings. Despite [1]
rendering them invalid, this series still simplifies the DSI OF graphs on all
i.MX8M variants by adding an empty output endpoint.
Each board enabling DSI connection can simply reference the label.
Patch 5 uses applies this to MBa8Mx board.

Best regards,
Alexander

[1] https://lore.kernel.org/linux-samsung-soc/20231122-dtc-warnings-v2-1-bd4087325392@kernel.org/

Alexander Stein (5):
  arm64: dts: imx8mm: Add empty DSI output endpoint
  arm64: dts: imx8mn: Add empty DSI output endpoint
  arm64: dts: imx8mq: Add empty DSI output endpoint
  arm64: dts: imx8mp: Add empty DSI output endpoint
  arm64: dts: mba8mx: Simplify DSI connection

 arch/arm64/boot/dts/freescale/imx8mm.dtsi |  7 +++++++
 arch/arm64/boot/dts/freescale/imx8mn.dtsi |  7 +++++++
 arch/arm64/boot/dts/freescale/imx8mp.dtsi |  7 +++++++
 arch/arm64/boot/dts/freescale/imx8mq.dtsi |  7 +++++++
 arch/arm64/boot/dts/freescale/mba8mx.dtsi | 14 ++++----------
 5 files changed, 32 insertions(+), 10 deletions(-)

Comments

Shawn Guo March 29, 2024, 12:16 p.m. UTC | #1 
On Fri, Mar 01, 2024 at 10:14:08AM +0100, Alexander Stein wrote:
> Hi,
> 
> this series was initially triggered by dtbs_check warnings. Despite [1]
> rendering them invalid, this series still simplifies the DSI OF graphs on all
> i.MX8M variants by adding an empty output endpoint.
> Each board enabling DSI connection can simply reference the label.
> Patch 5 uses applies this to MBa8Mx board.
> 
> Best regards,
> Alexander
> 
> [1] https://lore.kernel.org/linux-samsung-soc/20231122-dtc-warnings-v2-1-bd4087325392@kernel.org/
> 
> Alexander Stein (5):
>   arm64: dts: imx8mm: Add empty DSI output endpoint
>   arm64: dts: imx8mn: Add empty DSI output endpoint
>   arm64: dts: imx8mq: Add empty DSI output endpoint
>   arm64: dts: imx8mp: Add empty DSI output endpoint
>   arm64: dts: mba8mx: Simplify DSI connection

Applied all, thanks!