| Message ID | 20240409114211.310462-1-angelogioacchino.delregno@collabora.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | Radxa NIO-12L: Supplies for CPU/GPU and improvements | expand |
On Tue, 09 Apr 2024 13:42:06 +0200, AngeloGioacchino Del Regno wrote: > This series performs various improvements and enables PHYs and USB Role > Switching for proper PM support and to stop relying on the bootloader's > pre-boot configuration. > USB Role Switching doesn't include Alternate Modes yet, as this needs > some more work. > > As for the regulator nodes, those were not probing correctly, producing > unability to resume after PM suspend. > > AngeloGioacchino Del Regno (5): > arm64: dts: mediatek: mt8395-nio-12l: Fix MT6360 regulator nodes names > arm64: dts: medaitek: mt8395-nio-12l: Set i2c6 pins to bias-disable > arm64: dts: mediatek: mt8395-nio-12l: Define RSEL in microamperes > arm64: dts: mediatek: mt8395-nio-12l: Enable PHYs and USB role switch > arm64: dts: mediatek: mt8395-nio-12l: Add power supplies for CPU/GPU > scaling > > .../dts/mediatek/mt8395-radxa-nio-12l.dts | 106 ++++++++++++++++-- > 1 file changed, 94 insertions(+), 12 deletions(-) > > -- > 2.44.0 > > > My bot found new DTB warnings on the .dts files added or changed in this series. Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings are fixed by another series. Ultimately, it is up to the platform maintainer whether these warnings are acceptable or not. No need to reply unless the platform maintainer has comments. If you already ran DT checks and didn't see these error(s), then make sure dt-schema is up to date: pip3 install dtschema --upgrade New warnings running 'make CHECK_DTBS=y mediatek/mt8395-radxa-nio-12l.dtb' for 20240409114211.310462-1-angelogioacchino.delregno@collabora.com: arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dtb: soc: jpgdec-master: {'compatible': ['mediatek,mt8195-jpgdec'], 'power-domains': [[47, 24]], 'iommus': [[137, 621], [137, 622], [137, 626], [137, 627], [137, 628], [137, 629]], '#address-cells': [[2]], '#size-cells': [[2]], 'ranges': True, 'jpgdec@1a040000': {'compatible': ['mediatek,mt8195-jpgdec-hw'], 'reg': [[0, 436469760, 0, 65536]], 'iommus': [[137, 621], [137, 622], [137, 626], [137, 627], [137, 628], [137, 629]], 'interrupts': [[0, 343, 4, 0]], 'clocks': [[38, 3]], 'clock-names': ['jpgdec'], 'power-domains': [[47, 23]]}, 'jpgdec@1a050000': {'compatible': ['mediatek,mt8195-jpgdec-hw'], 'reg': [[0, 436535296, 0, 65536]], 'iommus': [[137, 621], [137, 622], [137, 626], [137, 627], [137, 628], [137, 629]], 'interrupts': [[0, 344, 4, 0]], 'clocks': [[38, 4]], 'clock-names': ['jpgdec'], 'power-domains': [[47, 24]]}, 'jpgdec@1b040000': {'compatible': ['mediatek,mt8195-jpgdec-hw'], 'reg': [[0, 453246976, 0, 65536]], 'iommus': [[119, 653], [119, 654], [119, 658], [119, 659], [119, 660], [119, 661]], 'interrupts': [[0, 348, 4, 0]], 'clocks': [[32, 3]], 'clock-names': ['jpgdec'], 'power-domains': [[47, 25]]}} should not be valid under {'type': 'object'} from schema $id: http://devicetree.org/schemas/simple-bus.yaml# arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dtb: soc: jpgenc-master: {'compatible': ['mediatek,mt8195-jpgenc'], 'power-domains': [[47, 27]], 'iommus': [[119, 647], [119, 648], [119, 649], [119, 652]], '#address-cells': [[2]], '#size-cells': [[2]], 'ranges': True, 'jpgenc@1a030000': {'compatible': ['mediatek,mt8195-jpgenc-hw'], 'reg': [[0, 436404224, 0, 65536]], 'iommus': [[137, 615], [137, 616], [137, 617], [137, 620]], 'interrupts': [[0, 342, 4, 0]], 'clocks': [[38, 2]], 'clock-names': ['jpgenc'], 'power-domains': [[47, 26]]}, 'jpgenc@1b030000': {'compatible': ['mediatek,mt8195-jpgenc-hw'], 'reg': [[0, 453181440, 0, 65536]], 'iommus': [[119, 647], [119, 648], [119, 649], [119, 652]], 'interrupts': [[0, 347, 4, 0]], 'clocks': [[32, 2]], 'clock-names': ['jpgenc'], 'power-domains': [[47, 27]]}} should not be valid under {'type': 'object'} from schema $id: http://devicetree.org/schemas/simple-bus.yaml# arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dtb: pmic@34: charger: 'usb-otg-vbus' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/mfd/mediatek,mt6360.yaml# arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dtb: charger: 'usb-otg-vbus' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/power/supply/mt6360_charger.yaml# arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dtb: regulator: 'BUCK1', 'BUCK2', 'LDO1', 'LDO2', 'LDO3', 'LDO5', 'LDO6', 'LDO7' do not match any of the regexes: '^buck[12]$', '^ldo[123567]$', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/regulator/mt6360-regulator.yaml# arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dtb: display@14f06000: clocks: [[34, 14], [34, 43], [34, 44]] is too long from schema $id: http://devicetree.org/schemas/display/mediatek/mediatek,split.yaml#
This series performs various improvements and enables PHYs and USB Role Switching for proper PM support and to stop relying on the bootloader's pre-boot configuration. USB Role Switching doesn't include Alternate Modes yet, as this needs some more work. As for the regulator nodes, those were not probing correctly, producing unability to resume after PM suspend. AngeloGioacchino Del Regno (5): arm64: dts: mediatek: mt8395-nio-12l: Fix MT6360 regulator nodes names arm64: dts: medaitek: mt8395-nio-12l: Set i2c6 pins to bias-disable arm64: dts: mediatek: mt8395-nio-12l: Define RSEL in microamperes arm64: dts: mediatek: mt8395-nio-12l: Enable PHYs and USB role switch arm64: dts: mediatek: mt8395-nio-12l: Add power supplies for CPU/GPU scaling .../dts/mediatek/mt8395-radxa-nio-12l.dts | 106 ++++++++++++++++-- 1 file changed, 94 insertions(+), 12 deletions(-)