mbox series

[0/4] Add overlays to disable optional hardware in k3-am6xx-phycore-som boards

Message ID 20240502230829.1983678-1-nmorrisson@phytec.com (mailing list archive)
Headers show
Series Add overlays to disable optional hardware in k3-am6xx-phycore-som boards | expand

Message

Nathan Morrisson May 2, 2024, 11:08 p.m. UTC 
Add three overlays to disable the eth phy, rtc, and spi nor. These
overlays will be used to disable device tree nodes for components
that are optionally not populated.

Nathan Morrisson (4):
  arm64: dts: ti: k3-am64-phycore-som: Add serial_flash label
  arm64: dts: ti: k3-am6xx-phycore-som: Add overlay to disable eth phy
  arm64: dts: ti: k3-am6xx-phycore-som: Add overlay to disable rtc
  arm64: dts: ti: k3-am6xx-phycore-som: Add overlay to disabl spi nor

 arch/arm64/boot/dts/ti/Makefile               |  5 +++++
 .../boot/dts/ti/k3-am64-phycore-som.dtsi      |  2 +-
 .../ti/k3-am6xx-phycore-disable-eth-phy.dtso  | 19 +++++++++++++++++++
 .../dts/ti/k3-am6xx-phycore-disable-rtc.dtso  | 15 +++++++++++++++
 .../ti/k3-am6xx-phycore-disable-spi-nor.dtso  | 15 +++++++++++++++
 5 files changed, 55 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am6xx-phycore-disable-eth-phy.dtso
 create mode 100644 arch/arm64/boot/dts/ti/k3-am6xx-phycore-disable-rtc.dtso
 create mode 100644 arch/arm64/boot/dts/ti/k3-am6xx-phycore-disable-spi-nor.dtso